LP 250 NITROX ROTARY
Description:
It consists of an industrial screw compressor that delivers air at a pressure of 10 bar to the Parker® membrane. The percentage of oxygen obtained at the outlet can be adjusted from 32% to 36% thanks to a valve accessible on the front side of the compressor. If connected to a compressor with pumping unit 315 (MCH 16), Nitrox at 32% can be obtained up to a pressure of 232 bar. The oxygen analyzer allows you to check the correct percentage, adjusting it through the appropriate valve.
STANDARD EQUIPMENT:
- Electrical cabinet
- Automatic condensate drain
- 2 analyzers
- Thermostat
- 1 Parker Enoxy SA 708 oxygen membrane
PUMPING UNIT |
LP 250 |
---|---|
FLOW RATE |
950 l / min - 57 m3 / h - 33.5 CFM |
DRIVEN BY |
Electric three-phase 400 V - 50 Hz |
WORKING PRESSURE |
10 bar - 145 PSI |
DIMENSION (W x H x D) |
75 x 85 x 139 cm |
Data sheet
- COMPRESSORS
- NITROX DIAPHRAGM
Latest News
We are pleased to announce that we will be present at the next Aquasur fair, which...
Climate change is one of the most pressing global challenges we face today,...
Casco Antiguo, a global supplier in the supply of underwater equipment, will...