HD45 UNDERWATER HAMMER DRILL (With C.E.)
The feathering on / off valve and adjustable rotation speed allows easy drill bit start-up and precise control. The high torque rotation motor drives standard 736 Skil hex carbide tipped drill bits and is capable of drilling a 2 "diameter hole up to 29" deep. Fluted drill bits require no water or air to clear holes. Ideal for drilling holes for setting anchor bolts. Painted hi-visibility yellow.
Specification:
Schuck capacity: Up to 2 "diameter or 4" core bit
Steel capacity: 736 Skil hex
circuit type: Open Center
flow range: 7-9 gpm / 26-34 bpm
optimum flow: 8 gpm / 30 bpm
working pressure: 1500-2000 psi / 105-140 bar
full relief Setting: 2250 psi / 155 bar
rotation Speed: 0 - 300 rpm
weight (less tool bit) 49 lbs / 22.2 kg
length: 24½ "/ 62.2 cm
width (at handles) 14 "/ 35 cm
hydraulic ports: -8 SAE O-ring
couplers: Varies with model (See ordering information)
hose whipsYes (3⁄8 "NPT Male thread)
Features:
• T-Handle with large on / off trigger for precise control
• Stainless Steel spools and fasteners
• Forward-Reverse with adjustable bit rotation speed
• Feathering on / off valve allows easy start and control
• Uses 736 Skil fluted carbide tipped drill bits - requires no water / air to clear holes
• Drills ¾ "to 2" diameter holes up to 29 "deep and core drills up to 4" in diameter • Operates in any position
• Trouble free drill steel latch retainer
Data sheet
- TOOLS
- HYDRAULICS
Latest News
We are pleased to announce that we will be present at the next Aquasur fair, which...
Climate change is one of the most pressing global challenges we face today,...
Casco Antiguo, a global supplier in the supply of underwater equipment, will...