Cookie preferences
Previous
Next
LP 250 NITROX ROTARY
Coltri LP250 Nitrox ROTARY for Scuba Diving: It consists of an industrial screw compressor that delivers air at a pressure of 10 bar to the Parker® membrane. The percentage of oxygen obtained at the outlet can be adjusted from 32% to 36% thanks to a valve accessible on the front side of the compressor. If connected to a compressor with pumping unit 315 (MCH 16), Nitrox at 32% can be obtained up to a pressure of 232 bar. The oxygen analyzer allows you to check the correct percentage, adjusting it through the appropriate valve.
Description:
It consists of an industrial screw compressor that delivers air at a pressure of 10 bar to the Parker® membrane. The percentage of oxygen obtained at the outlet can be adjusted from 32% to 36% thanks to a valve accessible on the front side of the compressor. If connected to a compressor with pumping unit 315 (MCH 16), Nitrox at 32% can be obtained up to a pressure of 232 bar. The oxygen analyzer allows you to check the correct percentage, adjusting it through the appropriate valve.
STANDARD EQUIPMENT:
- Electrical cabinet
- Automatic condensate drain
- 2 analyzers
- Thermostat
- 1 Parker Enoxy SA 708 oxygen membrane
|
PUMPING UNIT |
LP 250 |
|---|---|
|
FLOW RATE |
950 l / min - 57 m3 / h - 33.5 CFM |
|
DRIVEN BY |
Electric three-phase 400 V - 50 Hz |
|
WORKING PRESSURE |
10 bar - 145 PSI |
|
DIMENSION (W x H x D) |
75 x 85 x 139 cm |