Cookie preferences
Previous
Next
CS11 UNDERWATER CHAIN SAW
The CS11 Underwater Work Circular Saw is designed to cut any type of wooden structure underwater, including bridge piers, docks and jetties. It was created to provide the diver with a very high chain speed to easily cut even the sturdiest posts and pillars.
Description:
The CS11 Underwater Work Circular Saw is designed to cut any type of wooden structure underwater, including bridge piers, docks and jetties. It was created to provide the diver with super high chain speed to easily cut even the sturdiest posts and pillars.
The power to weight ratio is significantly higher than in the rest of the saws for wood and is available in thicknesses of up to 91 cm.
Characteristics:
- Cut the bridge pillars and telephone poles.
- Great power in relation to its weight.
- Trigger locking device.
- Sleeves for the hands.
Technical specifications:
- Cutting capacity: 24, 30, 36 and 42 "/ 61, 76, 92 and 106 cm
- Chain type: 3/8 "links
- Circuit type: Open center
- Flow: 10-14 gpm / 38-53 lpm
- Optimal flow rate: 14 gpm / 53 lpm
- Working pressure: 1500-2000 psi / 105-140 bar
- Expansion: 2250 psi / 155 bar
- Engine speed at 12 hours: 5295 rpm
- Chain speed at 12 o'clock: 32,591 per minute / 13.16 meters per second
- Weight (without thickness / chain): 17 lbs / 7.7 kg
- Length (without thickness or chain): 17 "/ 43 cm
- Width: 9 "/ 23 cm
- Hydraulic ports: SAE -8 o-ring