STANLEY SK58 UNDERWATER HYDRAULIC SINKER DRILL FOR COMMERCIAL DIVING
Previous
Next
STANLEY SK58 UNDERWATER HYDRAULIC SINKER DRILL FOR COMMERCIAL DIVING

SK58 UNDERWATER SINKER DRILL

SBMP06010501DBS
STANLEY

The Stanley SK58 drill is a heavy duty drill, designed for underwater operations in concrete, rock and masonry drilling.The SK58 uses industry standard drilling steels and can drill up to 6m depth. The direct motor drive drives the rotation on the 1 "x 4 1/4" hex shank of the drill steel, the rotation It can be set between 0 and 300 RPM.

CONSULT WITH AN EXPERT

Description:

The Stanley SK58 drill is a heavy-duty drill designed for underwater operations in concrete, rock and masonry drilling.

The SK58 uses industry standard drilling steels and can drill up to 6m deep. The direct motor drive drives the rotation on the 1 "x 4 1/4" hex shank of the drill steel, the rotation It can be set between 0 and 300 RPM.

Characteristics:

  • The T-handle and proportional on / off valve provide easy starting and control.
  • Stainless steel coils and safety devices
  • Drill holes up to 7.5 cm (3 in) in diameter and 6 m (20 ft) deep.
  • Operate in any position
  • Air is needed to force debris out of the hole.