STANLEY HD45 UNDERWATER HIDRAULIC HAMMER DRILL (With C.E.) FOR COMMERCIAL DIVING
Previous
Next
STANLEY HD45 UNDERWATER HIDRAULIC HAMMER DRILL (With C.E.) FOR COMMERCIAL DIVING

HD45 UNDERWATER HAMMER DRILL (With C.E.)

STANLEY

The feathering on / off valve and adjustable rotation speed allows easy drill bit start-up and precise control. The high torque rotation motor drives standard 736 Skil hex carbide tipped drill bits and is capable of drilling a 2 "diameter hole up to 29" deep.

Description:

The feathering on / off valve and adjustable rotation speed allows easy drill bit start-up and precise control. The high torque rotation motor drives standard 736 Skil hex carbide tipped drill bits and is capable of drilling a 2 "diameter hole up to 29" deep. Fluted drill bits require no water or air to clear holes. Ideal for drilling holes for setting anchor bolts. Painted hi-visibility yellow.

Specification:

  • Schuck capacity: Up to 2 "diameter or 4" core bit
  • Steel capacity: 736 Skil hex
  • circuit type: Open Center
  • flow range: 7-9 gpm / 26-34 bpm
  • optimum flow: 8 gpm / 30 bpm
  • working pressure: 1500-2000 psi / 105-140 bar
  • full relief Setting: 2250 psi / 155 bar
  • rotation Speed: 0 - 300 rpm
  • weight (less tool bit) 49 lbs / 22.2 kg
  • length: 24½ "/ 62.2 cm
  • width (at handles) 14 "/ 35 cm
  • hydraulic ports: -8 SAE O-ring
  • couplers: Varies with model (See ordering information)
  • hose whipsYes (3⁄8 "NPT Male thread)

Features:

  • T-Handle with large on / off trigger for precise control
  • Stainless Steel spools and fasteners
  • Forward-Reverse with adjustable bit rotation speed
  • Feathering on / off valve allows easy start and control
  • Uses 736 Skil fluted carbide tipped drill bits - requires no water / air to clear holes
  • •Drills ¾ "to 2" diameter holes up to 29 "deep and core drills up to 4" in diameter • Operates in any position
  • Trouble free drill steel latch retainer
Manual

Manual