The ID07 is a high torque impact wrench used to adjust and loosen nuts and bolts. Apply a maximum impact torque of 675 Nm. Available with friction ring or bolt retainer sleeve.

Stanley hydraulic impact wrenches for underwater applications are designed to meet the most stringent requirements for underwater screwing. Their rugged design includes an integrated motor and a rugged mechanism for the tough demands of railroad maintenance. The weight ratio -The power of this equipment has no comparison with an impact wrench of this type on the market.

The underwater cavitation cleaning machine, powered by a three-phase 380v electric motor. Its quality / price ratio is really unbeatable. Power, reliability and lightness are its strengths.

The underwater cavitation cleaning machine is powered by a single phase electric motor, ideal for moderate work, where the convenience and accessibility of single phase electricity is a deciding factor.

This cavitation cleaning machine is equipped with a powerful 8 KW Yanmar diesel engine. Standard equipment includes the EVO 2 gun

The cavitation cleaning machine is driven by a powerful and reliable 9.5 kW gasoline engine or Honda engine. Standard equipment includes the Evo2 pistol.

Las bombas hidráulicas Stanley exemplifies the potencia pura of las herramientas hidráulicas. Nuestra bomba SM50 descarga nada menos que 500 galones por minuto (1890 lpm) y su tamaño pequeño the permite adjustarse a una caja de 11 pulgadas de profundidad por 10 pulgadas cuadradas (26.7 cm x 25.4 cm).

Stanley hydraulic pumps exemplify the sheer power of hydraulic tools. Our SM50 pump discharges no less than 500 gallons per minute (1890 lpm) and its small size allows it to fit into a box 11 inches deep by 10 inches square (26.7 cm x 25.4 cm).

The TP03 and TP08 waste pump lines are a good example of the hydraulic power used to pump liquids containing solids. The TP03 pump provides a discharge capacity of 450 gallons per minute (1688 l / min) and can pump solids up to a diameter of 76 mm (3 in). The TP08 has a discharge capacity of 800 gpm (3028 lpm) and can pump solids up to 4 inches (102 mm) in diameter.

The TP03 and TP08 waste pump lines are a good example of the hydraulic power used to pump liquids containing solids. The TP03 pump provides a discharge capacity of 450 gallons per minute (1688 l / min) and can pump solids up to a diameter of 76 mm (3 in). The TP08 has a discharge capacity of 800 gpm (3028 lpm) and can pump solids up to 4 inches (102 mm) in diameter.

Evo2 is the Cavitcleaner cavitation gun capable of removing any type of encrustation, from light encrustation to acorn shells and mussels. The Evo2 is easy to use, easy to use and among its strengths is safe use even for less experienced operators. It is available in several times: S, M, L. It is compatible with most high pressure machines.