CUTTER BR-22
![](/img/m/85.jpg)
For divers thought by divers, the Broco system optimizes performance, safety and facilitates use. The system includes a series of components designed to work together, ranging from the oxygen cylinder to the work clamp.
THOR 1600 G HD DRYSUIT
![](/img/m/373.jpg)
Northern Diver Thor 1600g HD Drysuit: The Northendiver Thor 1600 drysuit is constructed from vulcanized rubber and features vulcanized laminated polymers made on a 4-way multidirectional polyester fabric that provides greater strength and durability
LARGE FLOW RATE REDUCER 02 HVR
![](/img/m/85.jpg)
The Broco Oxygen Regulator is a two-stage unit with a high continuous flow for underwater combustion. Broco's studies show that the efficiency of the cut depends more on the flow of oxygen than on its pressure.
WELDING CLAMP BR-21
![](/img/m/85.jpg)
BR21 broco type compression welding system is designed with superior features. The BR-21 is lightweight, rugged, and designed to hold the electrode at the optimum angle to reduce diver fatigue.
DPR-275 DIVER PINGER RECEIVER
![](/img/m/450.jpg)
This small and rugged handheld diver acoustic receiver with LCD display and signal strength meter can track and locate any acoustic pinger that operates between 5 to 80 kHz.
CUTTER BR-22 PLUS
![](/img/m/85.jpg)
For divers thought by divers, the Broco system optimizes performance, safety and facilitates use. The system includes a series of components designed to work together, ranging from the oxygen cylinder to the work clamp.
ATT-400 ACOUSTIC TARGET TRANSPONDER
![](/img/m/450.jpg)
The ATT-400 transponder can operate underwater as a pinger or transponder. This underwater acoustic transponder is small and easy to deploy in depths of 1000m. When interrogated by the STI-350, DTI-300 or VADR series acoustic receivers, the ATT-400 provides range and bearing up to 750 meters away. The ATT-400 can also be programmed to operate as a free-running pinger. With a battery life of up to six months, this transponder is ideal for marking equipment and locations in poor visibility.
ULB-350 LOW COST LOCATION BEACON
![](/img/m/450.jpg)
This underwater beacon is a cost effective free-running pinger used for marking equipment and underwater sites to depths of 1,200m. Using a single 9-volt battery, the ULB-350 can send a continuous acoustic signal for up to 60 days or on a programmed time delay for up to three months.
PRS275 PINGER RECEIVER SYSTEM
![](/img/m/450.jpg)
The PRS-275 is a diver pinger receiver that can be converted to surface pinger receiver using a separate directional hydrophone and user adjustable staff assembly. The system includes the DPR-275 diver pinger receiver, waterproof headset, adjustable staff assembly with directional hydrophone, cable assembly, and shipping container.
SAFE HARNESS NORTHERN DIVER
![](/img/m/373.jpg)
With a phenomenal overall breaking strength of 1000kg, the All New Northern Diver R-Vest has surpassed the requirements set by the ‘Association of Diving Contractors International’ Standards.
NOVATECH FLASHERS
![](/img/m/630.jpg)
NOVATECH™ Beacons and Flashers are an integral component of ocean exploration and study. Flashers provide the added insurance of a visual aid with an intense flashing light to assist in recovery missions.
NOVATECH RADIO BEACONS
![](/img/m/630.jpg)
The NOVATECH™ Tracking & Monitoring products allow for recovery insurance in harsh submarine environments.
PROBLENDER 1000 TRIMIX BLENDER
![](/img/m/382.jpg)
The solution to mix Nitrox, Trimix, Triox and Héliox while emptying B50. Allows to mix any Nitrox, Trimix, Triox and Héliox having a maximal rate of 40% of O2. The technic consists in making Nitrox, Trimix, Triox or Héliox before compressing it by the mean of the compressor. That is why we must not exceed 40% of O2.
PROBLENDER 1000 NITROX BLENDER
![](/img/m/382.jpg)
The best solution to blend Nitrox while emptying B50 safety. Allows to blend any Nitrox up to 40 % of O2. The technique consists in mixing the Nitrox before passing it through the compressor. It is for this reason that we can not exceed 40 % of O2.