SAFE HARNESS NORTHERN DIVER

With a phenomenal overall breaking strength of 1000kg, the All New Northern Diver R-Vest has surpassed the requirements set by the ‘Association of Diving Contractors International’ Standards.

PANEL CONTROL II 2 DIVERS

The SBQ CONTROL II panel is a portable power system with control and monitoring for diving operations with surface air supply for two divers. The system was designed to supply air from the surface and control the depth of the divers.

FESA CLOSED LIFT GEAR

Seaflex designed, developed and manufactured what we call the Fully Enclosed Variable Buoyancy System (FESA), which is ideal for operations involving lifting and towing elements.The FESA Seaflex balloon, originally designed for a Deep Sea Plow specific project, the FESA system is suitable for many other lifting and towing scenarios

WELDING CLAMP EH400

The Hydroweld EH400 underwater welding gun is used throughout industry. Among its advantages, it should be noted that they are economical, very light and resistant. They are distributed together with a cable of approximately 2 meters and 50 mm2 terminated by a male Dinze type connector

ARNÉS SEGURIDAD MK5

The “vest style” safety harness that distributes the load over the whole body. This harness supports the fully equipped diver safely and comfortably. With stainless steel straps and D-rings with high load capacity and bottom rings for tools or hookah closures. With 6 pockets to each accommodate 8 pounds of lead, and the ability to quickly release them.

PANEL CONTROL III 3 DIVERS

The SBQ CONTROL III panel is a portable power system with control and monitoring for diving operations with surface air supply for three divers. The system was designed to supply air from the surface and control the depth of the divers.

SQUARE CLOSED LIFT GEAR MBU

MBUs are the most practical alternative for lifting solid bodies in many situations and are exceptional in towing scenarios. Since they can be simply lifted from a single point and easily picked up by the crane without the risk of tearing the belt.

PANEL CONTROL SBQ I (2 Wires)

The SBQ CONTROL I panel is a portable power system with control and monitoring for diving operations with surface air supply for two divers. The system was designed to supply air from the surface and control the depth of the divers.

WELDING CLAMP BR-21

BR21 broco type compression welding system is designed with superior features. The BR-21 is lightweight, rugged, and designed to hold the electrode at the optimum angle to reduce diver fatigue.

MARK IV JUMP JACKET HARNESS-BCD

Compensation harness-vest Mark IV Jump Jucket that allows the rapid recovery of the injured person thanks to the integrated lifting harness and supplying gas if necessary.

KMACS 5 NO COMMUNICATIONS

KMACS 5 NO COMMUNICATIONSThe Kirby Morgan® Air Control System 5 (KMACS 5) is a lightweight, portable control box for use in surface supplied air diving operations.

PANEL GAS KMACS5

The KMACS-5 is a lightweight, portable air supply, depth control and communications panel for two divers.

MK2 SAFE BOOTS

Divex MK2 work boots serve to improve diver safety and the life of all types of wetsuits, even in the most difficult conditions, protecting the lower extremities.

LIFTING BALLOONS OPEN W / VALVE

Parachute de levage ouvert subacqua: Parachute de levage I made in nylon avec des coutures renforcées et thermoscells pour eviter les fissures et les pertes d'air. Les attaches au ballon sont faites d'anneaux joints inoxydables au nylon au moyen d'un thermoscellage très robuste pour éviter les ruptures ou les déchirures