PANEL CONTROL II 2 DIVERS

The SBQ CONTROL II panel is a portable power system with control and monitoring for diving operations with surface air supply for two divers. The system was designed to supply air from the surface and control the depth of the divers.

WELDING CLAMP EH400

The Hydroweld EH400 underwater welding gun is used throughout industry. Among its advantages, it should be noted that they are economical, very light and resistant. They are distributed together with a cable of approximately 2 meters and 50 mm2 terminated by a male Dinze type connector

GREEN RIVER W/O COVER

The commercial diver´s favorite knife, very robust and large. Ideal for cutting large ropes and hoses.

PANEL CONTROL III 3 DIVERS

The SBQ CONTROL III panel is a portable power system with control and monitoring for diving operations with surface air supply for three divers. The system was designed to supply air from the surface and control the depth of the divers.

PANEL CONTROL I (2 Wires)

The SBQ CONTROL I panel is a portable power system with control and monitoring for diving operations with surface air supply for two divers. The system was designed to supply air from the surface and control the depth of the divers.

WELDING CLAMP BR-21

BR21 broco type compression welding system is designed with superior features. The BR-21 is lightweight, rugged, and designed to hold the electrode at the optimum angle to reduce diver fatigue.

DPR-275 DIVER PINGER RECEIVER

This small and rugged handheld diver acoustic receiver with LCD display and signal strength meter can track and locate any acoustic pinger that operates between 5 to 80 kHz.

KMACS 5 NO COMMUNICATIONS

KMACS 5 NO COMMUNICATIONSThe Kirby Morgan® Air Control System 5 (KMACS 5) is a lightweight, portable control box for use in surface supplied air diving operations.

KNIFE GR UEI + CASE KYDEX

The TDS GR UEI knife is a diving knife built with the robustness necessary for the most demanding jobs and responding to all the circumstances in which it is necessary to use it. Extended in military use, it has a design similar to that used by professional divers, but with a blade length of 10cm which makes it more manageable and with the flat tip.This version includes the Kydex case.

ATT-400 ACOUSTIC TARGET TRANSPONDER

The ATT-400 transponder can operate underwater as a pinger or transponder. This underwater acoustic transponder is small and easy to deploy in depths of 1000m. When interrogated by the STI-350, DTI-300 or VADR series acoustic receivers, the ATT-400 provides range and bearing up to 750 meters away. The ATT-400 can also be programmed to operate as a free-running pinger. With a battery life of up to six months, this transponder is ideal for marking equipment and locations in poor visibility.

PANEL GAS KMACS5

The KMACS-5 is a lightweight, portable air supply, depth control and communications panel for two divers.