CUTTER BR-22
For divers thought by divers, the Broco system optimizes performance, safety and facilitates use. The system includes a series of components designed to work together, ranging from the oxygen cylinder to the work clamp.
CENTRAL SUPERFICIE MINICOM 2 HILOS
The Mini-Com control unit is a device designed as an underwater communication system between the surface caller and one or two divers.
FOCO SHARK LIGHT LED
The Shark Light projector has been designed to illuminate work areas, even in the most hostile environments. Its small size and weight make it a very useful and easy to manage tool. The housing is made of stainless steel, which makes it almost indestructible to wear, with an output of 1500 to 1700 lumens and a light angle of 140 Âş. A 2-pin Seacon BH-2-MP connector is incorporated for reliable and secure coupling.
LARGE FLOW RATE REDUCER 02 HVR
The Broco Oxygen Regulator is a two-stage unit with a high continuous flow for underwater combustion. Broco's studies show that the efficiency of the cut depends more on the flow of oxygen than on its pressure.
SUBCOM SURFACE CENTRAL 4 WIRES
Central Area Subacqua Subcom 4 Hilos: The central Mini-Com is an equipo that ha sido diseñado como a system of subacuáticas comunicaciones between el tender in area y uno o dos buzos. Gracias a la comunicaciĂłn con 4 hilos los buzos pueden comunicarse entre sĂ.
BOAT TOWED METAL DETECTOR PULSE 10 - 12
An economical yet powerful boat towed metal detector for ferrous and non-ferrous metals
PVL CUTTING SYSTEM
Oxygen and propylene cutting system sub-system: Oxygen and propylene cutting system, clean cut without residue. Easy handling Robust 2 models: 55 degrees or 90 degrees
CHEMICAL LIGHT
DPR-275 DIVER PINGER RECEIVER
This small and rugged handheld diver acoustic receiver with LCD display and signal strength meter can track and locate any acoustic pinger that operates between 5 to 80 kHz.
CUTTER BR-22 PLUS
For divers thought by divers, the Broco system optimizes performance, safety and facilitates use. The system includes a series of components designed to work together, ranging from the oxygen cylinder to the work clamp.
ATT-400 ACOUSTIC TARGET TRANSPONDER
The ATT-400 transponder can operate underwater as a pinger or transponder. This underwater acoustic transponder is small and easy to deploy in depths of 1000m. When interrogated by the STI-350, DTI-300 or VADR series acoustic receivers, the ATT-400 provides range and bearing up to 750 meters away. The ATT-400 can also be programmed to operate as a free-running pinger. With a battery life of up to six months, this transponder is ideal for marking equipment and locations in poor visibility.
ULB-350 LOW COST LOCATION BEACON
This underwater beacon is a cost effective free-running pinger used for marking equipment and underwater sites to depths of 1,200m. Using a single 9-volt battery, the ULB-350 can send a continuous acoustic signal for up to 60 days or on a programmed time delay for up to three months.