CUTTER BR-22

For divers thought by divers, the Broco system optimizes performance, safety and facilitates use. The system includes a series of components designed to work together, ranging from the oxygen cylinder to the work clamp.

THOR 1600 G HD DRYSUIT

Northern Diver Thor 1600g HD Drysuit: The Northendiver Thor 1600 drysuit is constructed from vulcanized rubber and features vulcanized laminated polymers made on a 4-way multidirectional polyester fabric that provides greater strength and durability

SUPER RAPTOR MONO GAS HYDRAULIC PLANT

SUPER Raptor is a hydraulic power generator with 18 HP twin cylinder gasoline engine. The machine is available on demand with flow rates ranging from 20 to 38 liters / min and pressures up to 210 bars, depending on the size of the pump installed (example: 30 liters at 175 bars or 38 liters at 140 bars ) .

LARGE FLOW RATE REDUCER 02 HVR

The Broco Oxygen Regulator is a two-stage unit with a high continuous flow for underwater combustion. Broco's studies show that the efficiency of the cut depends more on the flow of oxygen than on its pressure.

PVL CUTTING SYSTEM

Oxygen and propylene cutting system sub-system: Oxygen and propylene cutting system, clean cut without residue. Easy handling Robust 2 models: 55 degrees or 90 degrees

NORWAY DRYSUIT

The TDS Norway drysuit, along with its twin the Quebec, are the range in compressed neoprene of TDS watertight suits. The Norway model, is the variant more directed towards the technical diver, which stands out for incorporating a pocket of ample dimensions and a closure in feet of sock type to be able to use with a Rock boot to taste and making the whole suit lighter, also making possible to be able to turn the suit of complete menara.

QUEBEC DRYSUIT

The TDS Quebec drysuit, along with its twin the Norway, are the compressed neoprene range of TDS drysuits. The Quebec model includes a boot with a very light rigid sole, a feature that makes it very appreciated even by professional and commercial divers in their work. It also has a large pocket and flexible knee pads for protection.

DPR-275 DIVER PINGER RECEIVER

This small and rugged handheld diver acoustic receiver with LCD display and signal strength meter can track and locate any acoustic pinger that operates between 5 to 80 kHz.

DUAL ELECTRIC RAPTOR HYDRAULIC PLANT

SUPER RAPTOR DUAL has a double hydraulic supply. It offers two circuits at 19 l / min each or a simple circuit at 38 l / min, both with a pressure of 140 bar.

CUTTER BR-22 PLUS

For divers thought by divers, the Broco system optimizes performance, safety and facilitates use. The system includes a series of components designed to work together, ranging from the oxygen cylinder to the work clamp.

ATT-400 ACOUSTIC TARGET TRANSPONDER

The ATT-400 transponder can operate underwater as a pinger or transponder. This underwater acoustic transponder is small and easy to deploy in depths of 1000m. When interrogated by the STI-350, DTI-300 or VADR series acoustic receivers, the ATT-400 provides range and bearing up to 750 meters away. The ATT-400 can also be programmed to operate as a free-running pinger. With a battery life of up to six months, this transponder is ideal for marking equipment and locations in poor visibility.

HYDRAULIC PLANT NITRO GAS DUAL

SUPER RAPTOR is a hydraulic unit with gasoline engine and individual circuit, capable of providing different pressures and flow rates up to a maximum of 38 liters or a pressure of 175 Bar. It can also operate at: 30 l / min at 175 Bar or 38 l / min at 140 Bar.

HD13 HYDRAULIC HAMMER DRILL

13 kg hydraulic hammer drill for concrete, masonry and natural stone. Powerful and light, its use is ideal when performance, maneuverability and safety are required. The attack of the tops is the universal standard SDS MAX which allows to use a wide range tips and accessories available everywhere