ECOBLENDER 1000 NITROX BLENDER
![](/img/m/382.jpg)
The SEAEXPLORER moves through water by varying its buoyancy, allowing it to achieve long-term performance and stealth performance. He regularly returns to the surface to transmit information to the operator, in particular his position, the mission in progress, etc.
The AP Diving surface marker buoys can be inflated from a secondary air source, at any time during the dive to signal the end of it and mark the starting point .Also can be used as decompression globe.
The best solution to blend Nitrox while emptying B50 safety. Allows to blend any Nitrox up to 40 % of O2. The technique consists in mixing the Nitrox before passing it through the compressor. It is for this reason that we can not exceed 40 % of O2.
The solution to mix Nitrox, Trimix, Triox and HĂ©liox while emptying B50. Allows to mix any Nitrox, Trimix, Triox and HĂ©liox having a maximal rate of 40% of O2. The technic consists in making Nitrox, Trimix, Triox or HĂ©liox before compressing it by the mean of the compressor. That is why we must not exceed 40% of O2.
Apeks' WSX-45 sidemount harness comes complete with the bladder, harness with crotch strap, D-rings, bungee and accessory butt pack.The bladder is constructed from Armoguard™, a super-tough material normally found in public safety diving and military products. This smooth material is ten times more abrasion resistant than standard CorduraTM (the material used on many other sidemount harness bladders), making this a wing designed with serious sidemount diving in mind.
3 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. Oxygen Clean Rebreather Cylinder Valve: DIN 5/8" BSP outlet, green hand wheel and green bump cap, M25 x 2 ISO
Dry sealed system suitable for cold water diving. Specially designed for technical diving first stage.No turret, 4 MP port 3/8 UNF, 1 HP port 7/16 UNF