DECO BUOY 30 LB
The AP Diving surface marker buoys can be inflated from a secondary air source, at any time during the dive to signal the end of it and mark the starting point .Also can be used as decompression globe.
The AP Diving surface marker buoys can be inflated from a secondary air source, at any time during the dive to signal the end of it and mark the starting point .Also can be used as decompression globe.
Visibility is the most important aspect of any dive. The M1 mask raises the bar for optical quality and distortion free vision. This lens is an extra clear glass which is valued for its attractive appearance and optical qualities. The low iron content produces a higher light transmittance and a reduced green tint inherent in other glasses. This makes the lens distortion free and helps improve color and visibility in low light conditions underwater.
Apeks' WSX-45 sidemount harness comes complete with the bladder, harness with crotch strap, D-rings, bungee and accessory butt pack.The bladder is constructed from Armoguard™, a super-tough material normally found in public safety diving and military products. This smooth material is ten times more abrasion resistant than standard CorduraTM (the material used on many other sidemount harness bladders), making this a wing designed with serious sidemount diving in mind.
The Hollis fin blends graceful movement, power, and bulletproof construction. Meet the new standard in diving. Version with yellow tip for high visibility.
Increase you fin weight-power relationship with the new fins F2. If you are a traveler diver seeking to reduce weight, or simply are looking for a lightweight fin, look no further.
3 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. Oxygen Clean Rebreather Cylinder Valve: DIN 5/8" BSP outlet, green hand wheel and green bump cap, M25 x 2 ISO
Dry sealed system suitable for cold water diving. Specially designed for technical diving first stage.No turret, 4 MP port 3/8 UNF, 1 HP port 7/16 UNF
3 litre Steel Cylinder: WP 232 Bar, M25 x 2, c/w Diluent Sticker. Rebreather Diluent Cylinder Valve: DIN 5/8" BSP outlet, black hand wheel and black bump cap, M25 x 2 ISO