SUPER RAPTOR MONO GAS HYDRAULIC PLANT
SUPER Raptor is a hydraulic power generator with 18 HP twin cylinder gasoline engine. The machine is available on demand with flow rates ranging from 20 to 38 liters / min and pressures up to 210 bars, depending on the size of the pump installed (example: 30 liters at 175 bars or 38 liters at 140 bars ) .
DECO BUOY 30 LB
The AP Diving surface marker buoys can be inflated from a secondary air source, at any time during the dive to signal the end of it and mark the starting point .Also can be used as decompression globe.
LOTUS DUAL HYDRAULIC PLANT (2 Circuits)
It is a professional power source with diesel engine. Designed for tough jobs, the motor is in a capsule that absorbs noise and ensures quiet operation.
PERDIX COMPUTER OC/CC TRIMIX
DUAL ELECTRIC RAPTOR HYDRAULIC PLANT
SUPER RAPTOR DUAL has a double hydraulic supply. It offers two circuits at 19 l / min each or a simple circuit at 38 l / min, both with a pressure of 140 bar.
30 LB DECO BUOY RED-YELLOW
PERDIX AI COMPUTER
HD13 HYDRAULIC HAMMER DRILL
13 kg hydraulic hammer drill for concrete, masonry and natural stone. Powerful and light, its use is ideal when performance, maneuverability and safety are required. The attack of the tops is the universal standard SDS MAX which allows to use a wide range tips and accessories available everywhere
INSPIRATION EVP REBREATHER
PETREL 2 COMPUTER OC/CC TRIMIX
WTX BACK PLATE STEEL
RK3 FIN
INSPIRATION XPD REBREATHER
PETREL 2 FISCHER COMPUTER OC/CC TRIMIX
WTX BACK PLATE ALUMINIUM
WSX-45 SIDEMOUNT FULL SET
Apeks' WSX-45 sidemount harness comes complete with the bladder, harness with crotch strap, D-rings, bungee and accessory butt pack.The bladder is constructed from Armoguard™, a super-tough material normally found in public safety diving and military products. This smooth material is ten times more abrasion resistant than standard CorduraTM (the material used on many other sidemount harness bladders), making this a wing designed with serious sidemount diving in mind.
DC18 DISC SAW DOA
The radial DC18 is the same tool as the DC14 and the DC16 but with a hydraulic motor to operate with a flow rate of 38L / min. The saw supports different sizes of discs: 300, 350, 400 and, to have several rotational speeds, it can work with a flow rate of 20, 30 or 40 L / min.
RK3 GREY HD FIN
MALE DIN 200 G5/8 TO FEMALE M26 CONVERTER
AS23 HYDRAULIC GRINDER DOA
AS23 is a compact angle sharpening saw which, thanks to its hydraulic operation, provides power, reduced noise, long life and maximum safety with the implicit impossibility of electric shock.