DECO SMB 12 L

Semi-closed buoy, dimensions 133x23 cm, volume 12 litres, lined with reflexive tape, large bolt-snap integrated. material: high-frequency welded Nylon, stainless-steel AISI 316 weight: 0,39 kg

7 L ALUMINIUM CYLINDER WHITE WO/ VALVE 200 B

The range of aluminium cylinders offered by BtS Europa AG is produced by Luxfer Gas Cylinders either at their UK or US production plants. Luxfer Gas Cylinders is the world’s largest manufacturer of high pressure aluminium cylinders.

NH / 3 MANTA MULTIFUNCTION HELMET

Versatile helmCasco Northern Diver Manta NH/3: Casco multipropósito para el rescate en un alto espectro de situaciones, con 9 certificaciones disponibles. Permite una gran polivalencia en un alto espectro de situaciones debido a sus 9 certificaciones distintas. Logra así la reducción de equipo en Brigadas de Rescate con actuaciones en de muy diversa índole.et for rescue in a wide range of situations, with 9 certifications available.

ELEV 8 HELMET

Compact, durable and lightweight helmet certified to work at height.

It has ten ventilation points in the helmet, protected by a mesh to prevent the ingress of dirt and allow water to pass through the helmet when used in the water.

Available in 4 colors (red, black, yellow and black)

STEEL 12 L 232 B LONG CONCAVE SINGLE

The range of steel cylinders offered by BtS Europa AG is produced by Eurocylinders System AG (ECS). ECS is one of the biggest and most efficient manufacturers of high pressure steel cylinders in Europe with an annual output of more than 500,000 cylinders. ECS manufactures on two production lines at their plant in Apolda, Germany. Cylinders are forged from 34CrMo4 steel.

WTX BACK PLATE STEEL

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

20 L 232 B STEEL CYLINDER WITHOUT VALVE

The range of steel cylinders offered by BtS Europa AG is produced by Eurocylinders System AG (ECS). ECS is one of the biggest and most efficient manufacturers of high pressure steel cylinders in Europe with an annual output of more than 500,000 cylinders. ECS manufactures on two production lines at their plant in Apolda, Germany. Cylinders are forged from 34CrMo4 steel.

DIAMOND SIDEMOUNT COMPLETE

Sidemount DIAMOND complete system, our top quality product, CE certified!!! Contains of DIAMOND shaped wing and complete harness. Developed and tested by Czech best cave divers, used during our explorations on Yucatan, where we have 64 km long UW system - 4th longest on the world!

RK3 FIN

apeks rk3 fin: Designed in collaboration with the US military and renowned for outstanding performance and reliability, the Apeks RK3 is a rugged thermoplastic rubber fin featuring an over-sized foot pocket to accommodate drysuit boots and a spring strap for easy donning and doffing. The RK3 is available in three sizes: Medium, Large and Super.

WATERPROOF MOLLE 240 L BACKPACK

A large watertight and hermetic bag with integrated MOLLE system. Featuring a heavy duty 8-step BDM carbide metal zipper, the large bergen is constructed from 600D TPU CN black nylon and has welded seams for additional reinforcement.

WTX BACK PLATE ALUMINIUM

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

WSX-45 SIDEMOUNT FULL SET

Apeks' WSX-45 sidemount harness comes complete with the bladder, harness with crotch strap, D-rings, bungee and accessory butt pack.The bladder is constructed from Armoguard™, a super-tough material normally found in public safety diving and military products. This smooth material is ten times more abrasion resistant than standard CorduraTM (the material used on many other sidemount harness bladders), making this a wing designed with serious sidemount diving in mind.

RK3 GREY HD FIN

apeks rk3 hd grey fin: The RK3 HD is the next fin in the RK3 range of fins. The RK3 HD is made from a higher density material than the standard RK3, which makes the fin stiffer and heavier. The RK3 HD was developed in response to feedback from divers who prefer a heavier fin. The new compound of the RK3 HD adds more weight to make it negatively buoyant. An ideal fin for dry suit diving.

WATERPROOF MOLLE 60 L BACKPACK

A large airtight, airtight and lightweight bag with an integrated MOLLE system. The 60L YKK® Seco Zippered Sack Bag with MOLLE System is made of 420D TPU CN black nylon and has welded seams for reinforcement.

KNIFE W/ POCKET

Pocket from polyamide strap, stainless-steel knife with jagged blade (50 mm).

REEL 60 M

Reel with a classic shape, manufactured from durable delrin. Delrin is used more and more often for manufacturing of diving equipment as its tensile properties, mechanical ruggedness and minimal absorbability. Weight of complete reel: 0,58 Kg / diameter: 100 mm / width: 50 mm

REEL 120 M

Reel with a classic shape, manufactured from durable delrin. Delrin is used more and more often for manufacturing of diving equipment as its tensile properties, mechanical ruggedness and minimal absorbability. Weight: 0,88 Kg diameter: 125 mm width: 58 mm

REEL W/KEVLAR LINE 200 M

Reel with a classic shape, manufactured from durable delrin. Delrin is used more and more often for manufacturing of diving equipment as its tensile properties, mechanical ruggedness and minimal absorbability. Weight: 1,18 Kg diameter: 140 mm width: 85 mm