DECO SMB 12 L

Semi-closed buoy, dimensions 133x23 cm, volume 12 litres, lined with reflexive tape, large bolt-snap integrated. material: high-frequency welded Nylon, stainless-steel AISI 316 weight: 0,39 kg

DECO BUOY 30 LB

The AP Diving surface marker buoys can be inflated from a secondary air source, at any time during the dive to signal the end of it and mark the starting point .Also can be used as decompression globe.

30 LB DECO BUOY RED-YELLOW

APSMBC - Self-sealing Surface Marker Buoy. The original Hi Viz self-sealing surface marker buoy. The SMBC can be inflated from a second stage air source. It can be inflated for the duration of the dive or used as a delayed-action deco buoy. A dump/over-pressure valve prevents over inflation and allows deflation after use.

INSPIRATION EVP REBREATHER

The Inspiration EVP is a hybrid unit offering advantages from both stable-mates. It features the longer duration scrubber of the XPD and the smaller cylinders (and therefore unit size) of the EVO. The Inspiration EVP is a very popular model - sport or technical, travel or expedition - it is an excellent all-rounder for divers who do a mix of dives or who want a smaller unit than the XPD while retaining its extended duration

WTX BACK PLATE STEEL

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

DIAMOND SIDEMOUNT COMPLETE

Sidemount DIAMOND complete system, our top quality product, CE certified!!! Contains of DIAMOND shaped wing and complete harness. Developed and tested by Czech best cave divers, used during our explorations on Yucatan, where we have 64 km long UW system - 4th longest on the world!

RK3 FIN

apeks rk3 fin: Designed in collaboration with the US military and renowned for outstanding performance and reliability, the Apeks RK3 is a rugged thermoplastic rubber fin featuring an over-sized foot pocket to accommodate drysuit boots and a spring strap for easy donning and doffing. The RK3 is available in three sizes: Medium, Large and Super.

INSPIRATION XPD REBREATHER

The Inspiration started the CCR revolution over 15 years ago and the Inspiration XPD is based on the original spec – the larger unit with a longer duration scrubber and 3 litre cylinders - ideal for deeper, longer duration diving or a series of shorter repeat dives. The Inspiration XPD is the expedition divers rebreather of choice

WTX BACK PLATE ALUMINIUM

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

WSX-45 SIDEMOUNT FULL SET

Apeks' WSX-45 sidemount harness comes complete with the bladder, harness with crotch strap, D-rings, bungee and accessory butt pack.The bladder is constructed from Armoguard™, a super-tough material normally found in public safety diving and military products. This smooth material is ten times more abrasion resistant than standard CorduraTM (the material used on many other sidemount harness bladders), making this a wing designed with serious sidemount diving in mind.

RK3 GREY HD FIN

apeks rk3 hd grey fin: The RK3 HD is the next fin in the RK3 range of fins. The RK3 HD is made from a higher density material than the standard RK3, which makes the fin stiffer and heavier. The RK3 HD was developed in response to feedback from divers who prefer a heavier fin. The new compound of the RK3 HD adds more weight to make it negatively buoyant. An ideal fin for dry suit diving.

KNIFE W/ POCKET

Pocket from polyamide strap, stainless-steel knife with jagged blade (50 mm).

REEL 60 M

Reel with a classic shape, manufactured from durable delrin. Delrin is used more and more often for manufacturing of diving equipment as its tensile properties, mechanical ruggedness and minimal absorbability. Weight of complete reel: 0,58 Kg / diameter: 100 mm / width: 50 mm

X-TEK STAINLESS STEEL BACK PLATE

This backplate features optimized stability. Ergonomic shape for maximum comfort and eliminates back stress on extended dives. Numerous options on where to attach storage pack and additional various accessories

REEL 120 M

Reel with a classic shape, manufactured from durable delrin. Delrin is used more and more often for manufacturing of diving equipment as its tensile properties, mechanical ruggedness and minimal absorbability. Weight: 0,88 Kg diameter: 125 mm width: 58 mm

X-TEK ALUMINIUM BACK PLATE

The perfect travel companion. Maximum stability despite low weight. (Picture shows back plate with PURE TEK Harness and shoulder padding)

CHEMGENE HLD4L DISINFECTANT (1 l)

Disinfectant for cleaning AP BCD Inner bladders, Valves, Hoses and Rebreather Counterlungs. Chemgene HLD4L Disinfectant has been chosen for its ability to destroy a wide variety of bacteria, viruses and fungi including Legionella, Weils disease, Hepatitis, Herpes, Influenza, TB and HIV

REEL W/KEVLAR LINE 200 M

Reel with a classic shape, manufactured from durable delrin. Delrin is used more and more often for manufacturing of diving equipment as its tensile properties, mechanical ruggedness and minimal absorbability. Weight: 1,18 Kg diameter: 140 mm width: 85 mm

FINE JET FIN WITH STRAP

Scubapro Diving Fin Jet Fin with strap: The SCUBAPRO Jet Fins have a long and glorious history of performance. They set a new standard for power and longevity in 1965, and are still extremely popular today.