SECUBLENDER 1000 NITROX BLENDER
PROBLENDER 1000 NITROX BLENDER
The best solution to blend Nitrox while emptying B50 safety. Allows to blend any Nitrox up to 40 % of O2. The technique consists in mixing the Nitrox before passing it through the compressor. It is for this reason that we can not exceed 40 % of O2.
PROBLENDER 1000 TRIMIX BLENDER
The solution to mix Nitrox, Trimix, Triox and HĂ©liox while emptying B50. Allows to mix any Nitrox, Trimix, Triox and HĂ©liox having a maximal rate of 40% of O2. The technic consists in making Nitrox, Trimix, Triox or HĂ©liox before compressing it by the mean of the compressor. That is why we must not exceed 40% of O2.
M1 MASK
Visibility is the most important aspect of any dive. The M1 mask raises the bar for optical quality and distortion free vision. This lens is an extra clear glass which is valued for its attractive appearance and optical qualities. The low iron content produces a higher light transmittance and a reduced green tint inherent in other glasses. This makes the lens distortion free and helps improve color and visibility in low light conditions underwater.
M4 MASK
WTX BACK PLATE STEEL
RK3 FIN
WTX BACK PLATE ALUMINIUM
WSX-45 SIDEMOUNT FULL SET
Apeks' WSX-45 sidemount harness comes complete with the bladder, harness with crotch strap, D-rings, bungee and accessory butt pack.The bladder is constructed from Armoguard™, a super-tough material normally found in public safety diving and military products. This smooth material is ten times more abrasion resistant than standard CorduraTM (the material used on many other sidemount harness bladders), making this a wing designed with serious sidemount diving in mind.
RK3 GREY HD FIN
F1 FIN YELLOW TIP
The Hollis fin blends graceful movement, power, and bulletproof construction. Meet the new standard in diving. Version with yellow tip for high visibility.
F2 FIN BLACK
Increase you fin weight-power relationship with the new fins F2. If you are a traveler diver seeking to reduce weight, or simply are looking for a lightweight fin, look no further.
SPOOL BLUE 45 M
ATT-400 ACOUSTIC TARGET TRANSPONDER
The ATT-400 transponder can operate underwater as a pinger or transponder. This underwater acoustic transponder is small and easy to deploy in depths of 1000m. When interrogated by the STI-350, DTI-300 or VADR series acoustic receivers, the ATT-400 provides range and bearing up to 750 meters away. The ATT-400 can also be programmed to operate as a free-running pinger. With a battery life of up to six months, this transponder is ideal for marking equipment and locations in poor visibility.
SPOOL GREEN 30 M
DS4 1st STAGE DIN
Dry sealed system suitable for cold water diving. Specially designed for technical diving first stage.No turret, 4 MP port 3/8 UNF, 1 HP port 7/16 UNF
SPOOL VIOLET 15 M
ULB-350 LOW COST LOCATION BEACON
This underwater beacon is a cost effective free-running pinger used for marking equipment and underwater sites to depths of 1,200m. Using a single 9-volt battery, the ULB-350 can send a continuous acoustic signal for up to 60 days or on a programmed time delay for up to three months.
DPR-275 DIVER PINGER RECEIVER
This small and rugged handheld diver acoustic receiver with LCD display and signal strength meter can track and locate any acoustic pinger that operates between 5 to 80 kHz.