ECOBLENDER 1000 NITROX BLENDER

Simple Nitrox blender. The perfect solution for the private individual. The analysis of the rate of oxygen is made by connecting the OxyTester unit on the analysis base. The gas injection is made trough a manoregulator gone up the gas tank and a flow regulator which are supplied.

SECUBLENDER 1000 NITROX BLENDER

Nitrox blender with electro-valve which cut the arrival of oxygen in case of stop of the compressor. The analysis of the rate of oxygen is made by connecting the OxyTester unit on the analysis base.

PROBLENDER 1000 NITROX BLENDER

The best solution to blend Nitrox while emptying B50 safety. Allows to blend any Nitrox up to 40 % of O2. The technique consists in mixing the Nitrox before passing it through the compressor. It is for this reason that we can not exceed 40 % of O2.

FLEX GLOVE 2 MM

Super flexible 2 mm thick neoprene glove with inner and outer lycra lining and non-slip reinforced palm.

JET FIN TECH FIN

Extremely robust Jet Fin fin and powerful stroke. Includes stainless steel springs protected with neoprene. Intended for military, police and rescue units.

Wide and reinforced foot pocket.

Available colors, black, red, yellow, green, blue, pink, white and camo.

Sizes XS, SM, LXL, 2XL.

PROBLENDER 1000 TRIMIX BLENDER

The solution to mix Nitrox, Trimix, Triox and Héliox while emptying B50. Allows to mix any Nitrox, Trimix, Triox and Héliox having a maximal rate of 40% of O2. The technic consists in making Nitrox, Trimix, Triox or Héliox before compressing it by the mean of the compressor. That is why we must not exceed 40% of O2.

WTX BACK PLATE STEEL

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

RK3 FIN

apeks rk3 fin: Designed in collaboration with the US military and renowned for outstanding performance and reliability, the Apeks RK3 is a rugged thermoplastic rubber fin featuring an over-sized foot pocket to accommodate drysuit boots and a spring strap for easy donning and doffing. The RK3 is available in three sizes: Medium, Large and Super.

WTX BACK PLATE ALUMINIUM

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

WSX-45 SIDEMOUNT FULL SET

Apeks' WSX-45 sidemount harness comes complete with the bladder, harness with crotch strap, D-rings, bungee and accessory butt pack.The bladder is constructed from Armoguard™, a super-tough material normally found in public safety diving and military products. This smooth material is ten times more abrasion resistant than standard CorduraTM (the material used on many other sidemount harness bladders), making this a wing designed with serious sidemount diving in mind.

RK3 GREY HD FIN

apeks rk3 hd grey fin: The RK3 HD is the next fin in the RK3 range of fins. The RK3 HD is made from a higher density material than the standard RK3, which makes the fin stiffer and heavier. The RK3 HD was developed in response to feedback from divers who prefer a heavier fin. The new compound of the RK3 HD adds more weight to make it negatively buoyant. An ideal fin for dry suit diving.

STEEL BOTTLE 5 L 200 Bar WITHOUT TAP

Steel helmet of the Faber brand of 5 liters of capacity. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. Working pressure 200 Bar

STEEL BOTTLE 10 L 200 Bar WITHOUT TAP

10-liter capacity Faber brand steel helmet. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. Working pressure 200 Bar

SOLO SHIPBOARDING 25th DRYSUIT

Our most technologically advanced Dry Suit, the Shipboarding 25th dry suit has been designed in collaboration with Military Special Task Forces, with High Quality Materials and Special Tailoring Techniques. We consider the Solo Shipboarding 25th our best Trilaminate Dry Suit in terms of mobility, comfort, and overall resistance.

SOLO EXPEDITION 25th DRYSUIT

A perfect combination of lightness, freedom of movement, mobility, and resistance. This is the DiveSystem's Solo Expedition Trilaminate Dry Suit.

BOTELLA ACERO 15 L 200 Bar S/GRIFO

15 liter capacity Faber brand steel helmet. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. 200 Bar working pressure (makes it lighter than the 232 Bar model)

SOLO POLLUCE 25th DRYSUIT

Full-top in extra high density neoprene foams, thickness 2 mm with Supratex outer lining and reinforced peds in Kevlar® on shoulders. Slacks in Ferguson trilaminate, with Poliestere outer lining and reinforced peds in Cordura 1000 on knees and buttocks

STEEL BOTTLE 15 L 232 Bar WITHOUT TAP

15 liter capacity Faber brand steel helmet. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. Working pressure 232 Bar