AUV A18S

A18-S is the 3D image sonar configuration of the A18 autonomous underwater vehicle of the ECA Group. This AUV is designed to develop precision 3D inspections of the seabed. It is deployed from a surface vessel and an LARS allowing automatic recovery can be used. The vehicle operates autonomously at depths of 300 meters with 21 hours of battery life and is easy to transport by plane.

AUV ECA A-9S

A9-S is the portable configuration of the A9 autonomous underwater vehicle

AMPHIBIAN BOOT 6.5 MM

The Amphibian diving boots are designed for a diver who wants the ultimate in support and protection. A stable footbed and hardwearing moulded outsole make this ideal for regular shore diving.

AUV A18D

A18-D is the mid-size autonomous underwater vehicle of the ECA, AUV group for deep water applications. It is dedicated to the precise exploration of the seabed in 3D. It performs autonomous missions from a depth of  3000 m for up to  21 hours and is easy to transport by plane for missions abroad. This system can be delivered with an LARS which enables automatic underwater recovery and Triton Imaging software applications for further data processing.

GLOVE LINER GLOVE 5 MM

The 5mm gloves offer the warmth and comfort comparable only to thicker traditional gloves. Features include: stretch neoprene for fit and comfort, and a Thermoflex lining for warmth, sealed seams to minimise water ingress, easy donning minimalist design, and a carbonite finish for grip and durability.

AUV ECA A-9E

A9-E is the configuration of the autonomous autonomous vehicle A9 of the ECA group, AUV, for environmental monitoring. In addition to acquiring images of the seabed, it will record bathymetric data as well as environmental information such as water turbidity, conductivity, temperature, fluorescence, dissolved oxygen or pH. Mission planning and tracking is done through user-friendly software that lets you track the vehicle at all times during your mission.

GLOVE LINER GLOVE 3 MM

The 3mm gloves provide amazing warmth during a dive. The 3mm gloves give outstanding dexterity – ideal for photography and videography

STAND ALONE TRIMIX ANALIZER

The Analyzer He/O2 is accurate and precision apparatus for measuring oxygen, nitrogen and helium concentration in diving breathing mixtures. It is a necessary assistant for technical divers who use nitrox and trimix mixtures.

SET DIVERS MAX TRIMIX ANALIZER

divesoft set divers max trimix analizer: The Divesoft Set Diver Max was compiled for divers, who prepare Nitrox and Trimix, need to measure resistance and voltage and want to have the analyzer stored in the watertight Peli case 1200. Set Divers Max contains standard flow limiter unlike Blender Sets, which include professional flow limiter

SET BLENDER MAX TRIMIX ANALIZER

Professional Set Blender Max was compiled for divers and mainly for filling stations, which prepare Nitrox and Trimix, which need to measure resistance and voltage + which want to have analyzer stored in the waterproof Peli Case 1200. Set Blender Max contains professional flow limiter unlike Diver Sets, which include standard flow limiter.

ATT-400 ACOUSTIC TARGET TRANSPONDER

The ATT-400 transponder can operate underwater as a pinger or transponder. This underwater acoustic transponder is small and easy to deploy in depths of 1000m. When interrogated by the STI-350, DTI-300 or VADR series acoustic receivers, the ATT-400 provides range and bearing up to 750 meters away. The ATT-400 can also be programmed to operate as a free-running pinger. With a battery life of up to six months, this transponder is ideal for marking equipment and locations in poor visibility.

ULB-350 LOW COST LOCATION BEACON

This underwater beacon is a cost effective free-running pinger used for marking equipment and underwater sites to depths of 1,200m. Using a single 9-volt battery, the ULB-350 can send a continuous acoustic signal for up to 60 days or on a programmed time delay for up to three months.

DPR-275 DIVER PINGER RECEIVER

This small and rugged handheld diver acoustic receiver with LCD display and signal strength meter can track and locate any acoustic pinger that operates between 5 to 80 kHz.

PRS275 PINGER RECEIVER SYSTEM

The PRS-275 is a diver pinger receiver that can be converted to surface pinger receiver using a separate directional hydrophone and user adjustable staff assembly. The system includes the DPR-275 diver pinger receiver, waterproof headset, adjustable staff assembly with directional hydrophone, cable assembly, and shipping container.

DRYBASE TOP UNDERSUIT

Designed with a looser fit, this top can be worn on the way to the dive and then worn as part of a layering system next to the skin. Flat seams make the top very comfortable and the wicking fabric keeps the skin warm and dry. Wear underneath your everyday clothes prior to the dive, and then there is no need to get changed completely, thus helping you to stay warmer beforehand.

DRYBASE LEGGINS UNDERSUIT

A high performance alternative to cotton underwear, these leggings provide enhanced thermal protection and keep the skin drier an more comfortable during the dive. A high waist, wide elasticated waistband and flat seams throughout maximise next to skin comfort.