AUV A18S
A18-S is the 3D image sonar configuration of the A18 autonomous underwater vehicle of the ECA Group. This AUV is designed to develop precision 3D inspections of the seabed. It is deployed from a surface vessel and an LARS allowing automatic recovery can be used. The vehicle operates autonomously at depths of 300 meters with 21 hours of battery life and is easy to transport by plane.
220/2 320 BAR BOOSTER FULL SET
Booster Pump NRC 220/2 320 bar complete set for military diving and rebreather: The Booster 220/2 in a 320 bar final pressure SET. Booster set ready to connect, in a watertight case. Use: rebreather divers for loading small cylinders (2-3 liters), stage-bailout cylinders and loading mixtures in bibottles.
300/2 320 BAR BOOSTER FULL SET
Booster Pump NRC 300/2 320 bar complete set for technical diving and rebreather: The Booster 300/2 in a 320 bar final pressure SET. Booster set ready to connect, in a watertight case. Use: Commercial divers & Diving Centers
S.S. BACK PLATE
ALUMINIUM BACK PLATE
AUV A18D
A18-D is the mid-size autonomous underwater vehicle of the ECA, AUV group for deep water applications. It is dedicated to the precise exploration of the seabed in 3D. It performs autonomous missions from a depth of 3000 m for up to 21 hours and is easy to transport by plane for missions abroad. This system can be delivered with an LARS which enables automatic underwater recovery and Triton Imaging software applications for further data processing.
DECO SMB CLOSED
AUV ECA A-9E
A9-E is the configuration of the autonomous autonomous vehicle A9 of the ECA group, AUV, for environmental monitoring. In addition to acquiring images of the seabed, it will record bathymetric data as well as environmental information such as water turbidity, conductivity, temperature, fluorescence, dissolved oxygen or pH. Mission planning and tracking is done through user-friendly software that lets you track the vehicle at all times during your mission.
TRILOBITE LINE CUTTER W/ HARNESS COVER
SLIPSTREAM JET FIN
An OMS favorite! Slipstream Fins are made with monoprene creating a lightweight but high performance fin. Made with a spring heel strap, Slipstream Fins give divers an easy donning fin that will also “deliver the goods” in any condition.
JET FIN SLIPSTREAM COLOR FIN
An OMS favorite! Slipstream Fins are made with monoprene creating a lightweight but high performance fin. Made with a spring heel strap, Slipstream Fins give divers an easy donning fin that will also “deliver the goods” in any condition.
SPRING HEELS
NRC PICK O2 OXYGEN ANALIZER
BASIC DIR HARNESS
TRIM WEIGHT POCKET
TRIESTE WING 94 LB TWIN
The Trieste Double Bladder Wings are designed for the diver that prefers a wing with a redundant bladder. The secondary bladder is designed to ensure proper buoyancy control in the event of primary bladder failure. Horseshoe style, redundant wings are the choice wing picked by divers that are not wearing a drysuit. The redundant bladder is utilized in the rare event that the primary bladder is rendered unusable. The power/oral inflator is the same on both bladders. Overpressure valves are located on the respective sides of each bladder.
PERFORMANCE WING 32 LB SINGLE
The Performance Mono Wing is a donut-style wing allowing quick and easy movement of air from one side of the air cell to the other. It also has stabilizing bars built into the wing to reduce tank shifting during the dive. This is the ideal wing for the traveling diver as it is small, lightweight and easy to pack. The Mono wing will fit onto the IQ pac, Aluminum or Stainless Steel Backplate using the Comfort harness II or Continuous weave (Dir) harness.