X-TOLOK SIDEMOUNT

The X-Tolok sidemount sidemount side diving system from the TDS Cave series, has been developed entirely by the instructors at Cuevas in Playa del Carmen, the cradle of cave diving worldwide, with thousands of hours and miles of exploration in Cenotes. Incorporates an innovative three-dimensional air bladder system in the shape of a turtle shell, which strategically distributes the air across the back, providing an impeccable trim, in addition to providing unparalleled comfort for long duration dives

GBS RECHARGING OXYGEN SYSTEM

Siel GBS Booster Recharging Oxygen System for Military Diving: Portable Oxygen Filling System, Portable oxygen filling system represents the ideal portable base for oxygen rebreather recharging. It has been designed and produced following the best European standards and in accordance with all the safety guidelines.

copy of ALUMINIUM BACK PLATE

tds aluminium back plate: Anodized Aluminum Back Plate from TDS. Holes that let you adjust in two different heights. Perforations to pass the single tank straps. Multiple holes for different accessories.

HP GAUGE HOSE 15 Cm

High pressure hose for pressure gauge 15 cm length. Special to set the pressure gauge on the regulator of stage or bailout tank or in sidemount configurations.

METAL PRESSURE GAUGE 400 B

Pressure gauge in high quality metal housing and highly resistant mineral glass.Metalic and mineral glass finish.Scale up to 400 bar

X-BALAM SIDEMOUNT

The X-Balam sidemount sidemount side diving system from the Kave series of TDS, has been developed entirely by the cave instructors in Playa del Carmen, the cradle of cave diving worldwide, with thousands of hours and kilometers of exploration in Cenotes. The X-Balam is a system very directed to caving-diving due to its great versatility. The X-Balam has been designed as a minimalist and versatile system: includes a whole series of hardware to be able to configure the harness and poles in different ways. This hardware is delivered disassembled so that the diver can configure it according to his needs, preferences and adapting the lengths of the bungees (see detail image).

copy of S.S. BACK PLATE

Stainless Steel Back Plate from TDS.Compatible with all DTD accessories. Holes that let adjust in two different heights. Perforations to pass the single tank straps.

PRESSURE GAUGE HP HOSE 18 CM

High pressure hose for pressure gauge 18 cm length. Special to set the pressure gauge on side stage or bailout tank regulator.

PRESSURE GAUGE W/HANDLE 400 B

High quality pressure gauge with metal body and side handle, specially designed for diving in sidemount. Finished in metal and mineral glass. Scale up to 400 bar.

220/2 320 BAR BOOSTER FULL SET

Booster Pump NRC 220/2 320 bar complete set for military diving and rebreather: The Booster 220/2 in a 320 bar final pressure SET. Booster set ready to connect, in a watertight case. Use: rebreather divers for loading small cylinders (2-3 liters), stage-bailout cylinders and loading mixtures in bibottles.

ALUMINIUM BACKPLATE LIGHT BLACK

TDS Anodized Aluminum Reduced Back Plate. Ideal for travel thanks to its light weight: only 500 g. Perimeter edges and perforations completely beveled to avoid damaging equipment and harness straps.

CX12 XIBALBÁ SIDEMOUNT

Developed by the instructors of Caves in Playa del Carmen with thousands of hours and kilometers of exploration in Cenotes, the CX12 Xibalbá sidemount system is designed to meet the most demanding needs of lateral diving, both for explorers and for divers who enjoy of cavity diving.

HP GAUGE HOSE 65 CM

HP high pressure hose for pressure gauge 65 cm length. Connect the first stage regulator with a pressure gauge.

PY63 DIR PRESSURE GAUGE 350 B METAL

The TDS PY63 press gauge is specially designed for stage tanks; its main characteristic is that it has an expanded diameter of 63 mm (unlike standard gauges that have average 52 mm). The scale is enhanced by this larger diameter and also has the novelty that the mark of 100 bars is in the vertical, which helps in low visibility conditions and the backlit display, the needle is perfectly distinguishable.

300/2 320 BAR BOOSTER FULL SET

Booster Pump NRC 300/2 320 bar complete set for technical diving and rebreather: The Booster 300/2 in a 320 bar final pressure SET. Booster set ready to connect, in a watertight case. Use: Commercial divers & Diving Centers

HP HOSE FOR GAUGE 70 CM

HP high pressure hose for pressure gauge 70 cm length. Connect the first stage regulator with a pressure gauge.

S.S. BACK PLATE

Heavy duty and designed to work with single tanks or doubles. Our Stainless steel plates will be the last plate you every buy. We stopped at no expense on this plate. We have added multiple mounting holes, waist band holes and accessory holes to maximize comfort and flexibility. All edges have been rounded over and polished so you will never have to worry about wear from the plate.

PRESSURE GAUGE 400 B

Pressure gauge with metal body and up to 400 bar scale, ultra-resistant and durable due to to the protective rubber that covers it. Includes 80 cm length high-pressure hose.

CX12 KEVLAR XIBALBÁ SIDEMOUNT

Developed by the instructors of Caves in Playa del Carmen with thousands of hours and kilometers of exploration in Cenotes, the CX12 Xibalbá sidemount system is designed to meet the most demanding needs of lateral diving, both for explorers and for divers who enjoy of cavity diving.

HP GAUGE HOSE 80 CM

HP high pressure hose for pressure gauge 80 cm length. Connect the first stage regulator with a pressure gauge.

ALUMINIUM BACK PLATE

Heavy duty and designed to work with single tanks or doubles. Our coated Aluminum plate is light weight but strong. It is perfect for people that travel or don’t need the weight of a SS plate. We have added multiple mounting holes, waist band holes and accessory holes to maximize comfort and flexibility. All edges have been rounded over and polished so you will never have to worry about wear from the plate.