copy of ALUMINIUM BACK PLATE

tds aluminium back plate: Anodized Aluminum Back Plate from TDS. Holes that let you adjust in two different heights. Perforations to pass the single tank straps. Multiple holes for different accessories.

METAL PRESSURE GAUGE 400 B

Pressure gauge in high quality metal housing and highly resistant mineral glass.Metalic and mineral glass finish.Scale up to 400 bar

copy of S.S. BACK PLATE

Stainless Steel Back Plate from TDS.Compatible with all DTD accessories. Holes that let adjust in two different heights. Perforations to pass the single tank straps.

PRESSURE GAUGE W/HANDLE 400 B

High quality pressure gauge with metal body and side handle, specially designed for diving in sidemount. Finished in metal and mineral glass. Scale up to 400 bar.

ALUMINIUM BACKPLATE LIGHT BLACK

TDS Anodized Aluminum Reduced Back Plate. Ideal for travel thanks to its light weight: only 500 g. Perimeter edges and perforations completely beveled to avoid damaging equipment and harness straps.

PY63 DIR PRESSURE GAUGE 350 B METAL

The TDS PY63 press gauge is specially designed for stage tanks; its main characteristic is that it has an expanded diameter of 63 mm (unlike standard gauges that have average 52 mm). The scale is enhanced by this larger diameter and also has the novelty that the mark of 100 bars is in the vertical, which helps in low visibility conditions and the backlit display, the needle is perfectly distinguishable.

PRESSURE GAUGE 400 B

Pressure gauge with metal body and up to 400 bar scale, ultra-resistant and durable due to to the protective rubber that covers it. Includes 80 cm length high-pressure hose.

AIR/O2 SURFACE PRESSURE GAUGE DIN 200/300 B

Surface gauge for checking pressure out of the water bottles. DIN system. Purge by knob. Dial easy to read. Scale up to 400 bar. Is clean for use with oxygen, but if used with air the O2 service is lost.

BUNGEE PRO COMPASS GREY

New model tds diving compass pro liquid filled wrist in Bungee version (also available in rubber strap version). Redesigned quick response even in readings with up to 30 degrees.

SINGLE TANK ALU ADAPTER PIECE + TANK BANDS INOX

Plate for mounting a single bottle on back plate, in polished aluminum. Includes set of two bottle straps with stainless steel buckle. Also includes a complete set of screws with spherical head, square body to avoid turning when tightening, washers and wing nuts. Approximate weight of the set 1 kg

STAND ALONE TRIMIX ANALIZER

The Analyzer He/O2 is accurate and precision apparatus for measuring oxygen, nitrogen and helium concentration in diving breathing mixtures. It is a necessary assistant for technical divers who use nitrox and trimix mixtures.

SINGLE TANK ADAPTER PIECE

Plate to fitting single tank to back plate. Stainless steel or aluminum models. It also can be used to mount twins with double tank straps (not included). Weights: Stainless steel 0.870 kg

M8 SCREW S.S. 25 MM

Stainless steel M8 screw and 25mm long. To attach the single tank adapter to the back plate.

SET DIVERS MAX TRIMIX ANALIZER

divesoft set divers max trimix analizer: The Divesoft Set Diver Max was compiled for divers, who prepare Nitrox and Trimix, need to measure resistance and voltage and want to have the analyzer stored in the watertight Peli case 1200. Set Divers Max contains standard flow limiter unlike Blender Sets, which include professional flow limiter

SET BLENDER MAX TRIMIX ANALIZER

Professional Set Blender Max was compiled for divers and mainly for filling stations, which prepare Nitrox and Trimix, which need to measure resistance and voltage + which want to have analyzer stored in the waterproof Peli Case 1200. Set Blender Max contains professional flow limiter unlike Diver Sets, which include standard flow limiter.

DIR TECHNICAL HARNESS + SHOULDER PADS

TDS DIR Harness Scuba Diving Harnais: Technical harness for mounting on back plate (not included), with all necessary components included for a basic DIR configuration. The set is sold disassembled for the diver to assemble on his plate with his personal settings and preferences.

SOFT CONFORT TECHNICAL HARNESS

TDS Confort Plus Techncial Scuba Diving Harnais: Technical harness for mounting on back plate (not included) with adjustable and removable shoulder straps and all additional components. The set is sold disassembled so that the diver can mount it on his plate adapting it to his measurements and configuration preferences.

COMFORT TECHNICAL HARNESS

Technical harness for back plate mounting with all necessary components included and fully adjustable. Mounting and dismounting the back plate is very versatile, as it is fixed with screws of the twin cylinders themselves

BLACK WEIGHT POCKET 2.3 KG UNIT

High resistance cordura weight pocket for harness, with capacity for 2.3 kg ballast pads approximately. Fast closing and release clip in plastic on the outside and flap with Velcro. Ideal to place on harness webbing, tank webbing and even on belts. Stainless steel eyelet at the bottom for water drainage and rear strap to adjust to bottle buckle or harness. Sold by the unit.