copy of ALUMINIUM BACK PLATE
tds aluminium back plate: Anodized Aluminum Back Plate from TDS. Holes that let you adjust in two different heights. Perforations to pass the single tank straps. Multiple holes for different accessories.
tds aluminium back plate: Anodized Aluminum Back Plate from TDS. Holes that let you adjust in two different heights. Perforations to pass the single tank straps. Multiple holes for different accessories.
Stainless Steel Back Plate from TDS.Compatible with all DTD accessories. Holes that let adjust in two different heights. Perforations to pass the single tank straps.
TDS Anodized Aluminum Reduced Back Plate. Ideal for travel thanks to its light weight: only 500 g. Perimeter edges and perforations completely beveled to avoid damaging equipment and harness straps.
Stainless steel spring for jet fin fins type . The adjusto to the fin is made by a stainless steel screw with security nut. Add strength, durability and safety to the fins
The TDS Jet Fin Xtreme fin is one of the shortest fins of its kind, with a lateral reinforcement and designed to make it more maneuverable, which makes it very popular, like its predecessor, among technical and professional divers. Made of 100% rubber and with a compact design for superior mobility, it incorporates a dynamic edge for more powerful thrust, this design reduces drag on the up kick and improves the thrust on the up kick the bottom.
The TDS Jet Fin Xtreme fin is one of the shortest fins of its kind, with a lateral reinforcement and designed to make it more maneuverable, which makes it very popular, like its predecessor, among technical and professional divers. Made of 100% rubber and with a compact design for superior mobility, it incorporates a dynamic edge for more powerful thrust, this design reduces drag on the up kick and improves the thrust on the up kick the bottom.
The TDS Jet Fin Xtreme fin is one of the shortest fins of its kind, with a lateral reinforcement and designed to make it more maneuverable, something that makes it very popular, like its predecessor, among technical and professional divers. Made of 100% rubber and with a compact design for superior mobility, it incorporates a dynamic edge for a more powerful thrust, this design reduces drag on the up kick and improves thrust on the down kick.
Omaha Amphibian technical rockboot built in technical tissue with reinforced seams and loops. Must be used over the neoprene shoe applied to dry suits.
Plate for mounting a single bottle on back plate, in polished aluminum. Includes set of two bottle straps with stainless steel buckle. Also includes a complete set of screws with spherical head, square body to avoid turning when tightening, washers and wing nuts. Approximate weight of the set 1 kg
TDS Jet Fin MSP belongs to the tactical-military range, tested by different armies and special forces. Jet Fin type rubber fin "long" with traditional design, also available to technical and sport divers, as well as professional divers, looking for a powerful and immediate response fin. Made of 100% rubber, it offers a very high durability over time as well as resistance in the worst conditions.
Tds nitrox identification sticker to put on bottles Nitrox tanks and make a perfect identification and distinction from other bottles. Dimensions 60 cm x 15 cm
Label your Nitrox tank to prevent inappropriate use.Includes all the fields for a perfect identification.
TDS DIR Harness Scuba Diving Harnais: Technical harness for mounting on back plate (not included), with all necessary components included for a basic DIR configuration. The set is sold disassembled for the diver to assemble on his plate with his personal settings and preferences.
tds metalic decanting hose with digital pressure gauge and valve: tds Metalic decanting device for oxygen, with relieving pressure valve, 100 mm hose, digital pressure gauge and DIN 200/300 filling connection at both sides.
TDS Confort Plus Techncial Scuba Diving Harnais: Technical harness for mounting on back plate (not included) with adjustable and removable shoulder straps and all additional components. The set is sold disassembled so that the diver can mount it on his plate adapting it to his measurements and configuration preferences.
Metalic decanting device for oxygen. Purge tap. With pressure gauge to control the amount of transferred gas. DIN 200/300 connections at both ends. Hose length 2 m approx.
Metalic decanting device for oxygen, with relieving pressure valve, 2m hose, pressure gauge and DIN 200/300 filling connection at both sides.
Technical harness for back plate mounting with all necessary components included and fully adjustable. Mounting and dismounting the back plate is very versatile, as it is fixed with screws of the twin cylinders themselves
High resistance cordura weight pocket for harness, with capacity for 2.3 kg ballast pads approximately. Fast closing and release clip in plastic on the outside and flap with Velcro. Ideal to place on harness webbing, tank webbing and even on belts. Stainless steel eyelet at the bottom for water drainage and rear strap to adjust to bottle buckle or harness. Sold by the unit.
Heavy duty cordura accessory holder pocket for harness or jacket, perfect for carrying small accessories and even a spare mask . Ideal to place on harness webbing, jacket and even on belts with webbing up to 50 mm.
The TDS Xtrem Kangaroo pocket is a pocket specially designed for technical diving, being valid for both backmount and sidemount systems thanks to the versatility of its design. A pocket designed to the smallest detail to offer maximum performance to the technical diver.