ECOBLENDER 1000 NITROX BLENDER
TEK ADVANCED DECO BUOY SMB 150
TDS Tek Advanced diving surface marker buoy SMB 150 cm legth in red color. The inflation is realized by plastic valve with a bc hose, wing hose or dry suit hose. Also allows the buccal inflation. Thanks to its closed system, the air remains in the interior preserving the shape of the buoy, keeping it erect and comletely inflated on surface. It´s also possible to use as a bouyancy emergency element on the surface.
METAL PRESSURE GAUGE 400 B
Pressure gauge in high quality metal housing and highly resistant mineral glass.Metalic and mineral glass finish.Scale up to 400 bar
SECUBLENDER 1000 NITROX BLENDER
DECO SMB 12 L
PRESSURE GAUGE W/HANDLE 400 B
High quality pressure gauge with metal body and side handle, specially designed for diving in sidemount. Finished in metal and mineral glass. Scale up to 400 bar.
DECO BUOY 30 LB
The AP Diving surface marker buoys can be inflated from a secondary air source, at any time during the dive to signal the end of it and mark the starting point .Also can be used as decompression globe.
PY63 DIR PRESSURE GAUGE 350 B METAL
The TDS PY63 press gauge is specially designed for stage tanks; its main characteristic is that it has an expanded diameter of 63 mm (unlike standard gauges that have average 52 mm). The scale is enhanced by this larger diameter and also has the novelty that the mark of 100 bars is in the vertical, which helps in low visibility conditions and the backlit display, the needle is perfectly distinguishable.
PVC DRY GOLVES LATEX SEAL
PROBLENDER 1000 NITROX BLENDER
The best solution to blend Nitrox while emptying B50 safety. Allows to blend any Nitrox up to 40 % of O2. The technique consists in mixing the Nitrox before passing it through the compressor. It is for this reason that we can not exceed 40 % of O2.
PRESSURE GAUGE 400 B
Pressure gauge with metal body and up to 400 bar scale, ultra-resistant and durable due to to the protective rubber that covers it. Includes 80 cm length high-pressure hose.
30 LB DECO BUOY RED-YELLOW
FLEX GLOVE 2 MM
PROBLENDER 1000 TRIMIX BLENDER
The solution to mix Nitrox, Trimix, Triox and Héliox while emptying B50. Allows to mix any Nitrox, Trimix, Triox and Héliox having a maximal rate of 40% of O2. The technic consists in making Nitrox, Trimix, Triox or Héliox before compressing it by the mean of the compressor. That is why we must not exceed 40% of O2.
GLOVE LINER GLOVE 5 MM
DECO SMB CLOSED
DECO BUOY FOR LIGHTING 20 lb
AIR/O2 SURFACE PRESSURE GAUGE DIN 200/300 B
Surface gauge for checking pressure out of the water bottles. DIN system. Purge by knob. Dial easy to read. Scale up to 400 bar. Is clean for use with oxygen, but if used with air the O2 service is lost.