GULL Z TEK REVERSIBLE REGULATOR DIN

TDS Gull Z Military Diving Regulator reversible DIN: TDS Gull successful stages of TDS now full set of first and new reversible second stage Gull Z with hose and carriyin bag.

METAL PRESSURE GAUGE 400 B

Pressure gauge in high quality metal housing and highly resistant mineral glass.Metalic and mineral glass finish.Scale up to 400 bar

PRESSURE GAUGE W/HANDLE 400 B

High quality pressure gauge with metal body and side handle, specially designed for diving in sidemount. Finished in metal and mineral glass. Scale up to 400 bar.

PY63 DIR PRESSURE GAUGE 350 B METAL

The TDS PY63 press gauge is specially designed for stage tanks; its main characteristic is that it has an expanded diameter of 63 mm (unlike standard gauges that have average 52 mm). The scale is enhanced by this larger diameter and also has the novelty that the mark of 100 bars is in the vertical, which helps in low visibility conditions and the backlit display, the needle is perfectly distinguishable.

GULL FIRST STAGE

TDS stages GULL sold separately for experienced divers can mount the necessary settings for your type of diving. But it is essential that they are well trained to use it, because otherwise you may incur a hazard

PRESSURE GAUGE 400 B

Pressure gauge with metal body and up to 400 bar scale, ultra-resistant and durable due to to the protective rubber that covers it. Includes 80 cm length high-pressure hose.

GULL Z BLACK 2nd STAGE REVERSIBLE

TDS Gull Z Black Scuba Diving Second Stage Reversible: The TDS Gull Z is a lighter and improved version of its successful predecessor Gull Tek second stage, with an improved lid and a heat exchanger that improves the performance and performance in cold water.

AIR/O2 SURFACE PRESSURE GAUGE DIN 200/300 B

Surface gauge for checking pressure out of the water bottles. DIN system. Purge by knob. Dial easy to read. Scale up to 400 bar. Is clean for use with oxygen, but if used with air the O2 service is lost.

BUNGEE PRO COMPASS GREY

New model tds diving compass pro liquid filled wrist in Bungee version (also available in rubber strap version). Redesigned quick response even in readings with up to 30 degrees.

DS4 1st STAGE DIN

Dry sealed system suitable for cold water diving. Specially designed for technical diving first stage.No turret, 4 MP port 3/8 UNF, 1 HP port 7/16 UNF

SIDEMOUNT REGULATOR KIT

As the popularity of sidemount diving continues to grow around the world, Apeks delivers a regulator kit that contains all of the necessary hardware and accessories to complete your breathing set-up, including two award-winning XTX50 regulators.

TEK3 REGULATORS SET

Apeks has developed unique first stages specifically for use on a twinset. The benefits of this system are that there is a minimised risk of accidental snagging, no hose kinking and easier access to the manifold valves. Each first stage has three medium pressure ports and one high pressure port. They are over-balanced, cold water compatible and extremely robust. TEK3 looks great too!

XTX 200 REGULATOR DIN

The XTX 200 is second only to the XTX Tungsten and quite rightly enjoys its position towards the top of the Apeks regulator range. The definitive blend of style and high performance, every detail on this product has been carefully designed to offer a regulator of the highest quality.

XTX 50 REGULATOR DIN

The XTX50 is for the discerning diver who wants the benefits of a feature-rich regulator at a moderate price. This popular regulator has four medium-pressure ports all mounted on a rotating turret, resulting in optimal hose routing while eliminating sharp bends in the hose.

REGULATOR NECK BAND

Elastic rubber band for fixing the emergency regulator to the neck. Easy to locate and can even keep the second stage fixed to the mouth in an emergency situation.