DECO BUOY 30 LB
![](/img/m/34.jpg)
The AP Diving surface marker buoys can be inflated from a secondary air source, at any time during the dive to signal the end of it and mark the starting point .Also can be used as decompression globe.
30 LB DECO BUOY RED-YELLOW
![](/img/m/34.jpg)
FLEX GLOVE 2 MM
![](/img/m/479.jpg)
INSPIRATION EVP REBREATHER
![](/img/m/34.jpg)
WTX BACK PLATE STEEL
![](/img/m/35.jpg)
RK3 FIN
![](/img/m/35.jpg)
INSPIRATION XPD REBREATHER
![](/img/m/34.jpg)
WTX BACK PLATE ALUMINIUM
![](/img/m/35.jpg)
WSX-45 SIDEMOUNT FULL SET
![](/img/m/35.jpg)
Apeks' WSX-45 sidemount harness comes complete with the bladder, harness with crotch strap, D-rings, bungee and accessory butt pack.The bladder is constructed from Armoguard™, a super-tough material normally found in public safety diving and military products. This smooth material is ten times more abrasion resistant than standard CorduraTM (the material used on many other sidemount harness bladders), making this a wing designed with serious sidemount diving in mind.
RK3 GREY HD FIN
![](/img/m/35.jpg)
MALE DIN 200 G5/8 TO FEMALE M26 CONVERTER
![](/img/m/34.jpg)
MALE M26 TO DIN 200 G5/8 FEMALE CONVERTER
![](/img/m/34.jpg)
CHEMGENE HLD4L DISINFECTANT (1 l)
![](/img/m/34.jpg)
STEEL BOTTLE 5 L 200 Bar WITHOUT TAP
![](/img/m/479.jpg)
Steel helmet of the Faber brand of 5 liters of capacity. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. Working pressure 200 Bar
STEEL BOTTLE 10 L 200 Bar WITHOUT TAP
![](/img/m/479.jpg)
10-liter capacity Faber brand steel helmet. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. Working pressure 200 Bar
BOTELLA ACERO 15 L 200 Bar S/GRIFO
![](/img/m/479.jpg)
15 liter capacity Faber brand steel helmet. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. 200 Bar working pressure (makes it lighter than the 232 Bar model)
TEK OX OXYGEN MONITORING
![](/img/m/580.jpg)
STEEL BOTTLE 15 L 232 Bar WITHOUT TAP
![](/img/m/479.jpg)
15 liter capacity Faber brand steel helmet. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. Working pressure 232 Bar
BOTELLA ACERO 18 L 220 Bar S/GRIFO
![](/img/m/479.jpg)
Steel helmet of the Faber brand of 18 liters of capacity. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. Working pressure 220 Bar