SAFE HARNESS NORTHERN DIVER

With a phenomenal overall breaking strength of 1000kg, the All New Northern Diver R-Vest has surpassed the requirements set by the ‘Association of Diving Contractors International’ Standards.

X-VISION HD VIDEO SYSTEM

The X-Vision CCTV System by Casco Antiguo is a compact HD video system, ideal for very commercial diving operation, it is made for the toughest and most demanding jobs. It allows to monitor and record up to 4 divers simultaneously. The brightness of the SHARK LIGHT can be adjusted on demand from the surface X-Vision Panel. 

GREEN RIVER W/O COVER

The commercial diver´s favorite knife, very robust and large. Ideal for cutting large ropes and hoses.

ARNÉS SEGURIDAD MK5

The “vest style” safety harness that distributes the load over the whole body. This harness supports the fully equipped diver safely and comfortably. With stainless steel straps and D-rings with high load capacity and bottom rings for tools or hookah closures. With 6 pockets to each accommodate 8 pounds of lead, and the ability to quickly release them.

SUPER RAPTOR MONO GAS HYDRAULIC PLANT

SUPER Raptor is a hydraulic power generator with 18 HP twin cylinder gasoline engine. The machine is available on demand with flow rates ranging from 20 to 38 liters / min and pressures up to 210 bars, depending on the size of the pump installed (example: 30 liters at 175 bars or 38 liters at 140 bars ) .

FOCO SHARK LIGHT LED

The Shark Light projector has been designed to illuminate work areas, even in the most hostile environments. Its small size and weight make it a very useful and easy to manage tool. The housing is made of stainless steel, which makes it almost indestructible to wear, with an output of 1500 to 1700 lumens and a light angle of 140 º. A 2-pin Seacon BH-2-MP connector is incorporated for reliable and secure coupling.

MARK IV JUMP JACKET HARNESS-BCD

Compensation harness-vest Mark IV Jump Jucket that allows the rapid recovery of the injured person thanks to the integrated lifting harness and supplying gas if necessary.

DUAL ELECTRIC RAPTOR HYDRAULIC PLANT

SUPER RAPTOR DUAL has a double hydraulic supply. It offers two circuits at 19 l / min each or a simple circuit at 38 l / min, both with a pressure of 140 bar.

KNIFE GR UEI + CASE KYDEX

The TDS GR UEI knife is a diving knife built with the robustness necessary for the most demanding jobs and responding to all the circumstances in which it is necessary to use it. Extended in military use, it has a design similar to that used by professional divers, but with a blade length of 10cm which makes it more manageable and with the flat tip.This version includes the Kydex case.

MK2 SAFE BOOTS

Divex MK2 work boots serve to improve diver safety and the life of all types of wetsuits, even in the most difficult conditions, protecting the lower extremities.

HYDRAULIC PLANT NITRO GAS DUAL

SUPER RAPTOR is a hydraulic unit with gasoline engine and individual circuit, capable of providing different pressures and flow rates up to a maximum of 38 liters or a pressure of 175 Bar. It can also operate at: 30 l / min at 175 Bar or 38 l / min at 140 Bar.

KNIFE GR UEI

The TDS GR UEI knife is a diving knife built with the robustness necessary for the most demanding jobs and responding to all the circumstances in which it is necessary to use it. Extended in military use, it has a design similar to that used by professional divers, but with a blade length of 10cm which makes it more manageable and with the flat tip.

HD13 HYDRAULIC HAMMER DRILL

13 kg hydraulic hammer drill for concrete, masonry and natural stone. Powerful and light, its use is ideal when performance, maneuverability and safety are required. The attack of the tops is the universal standard SDS MAX which allows to use a wide range tips and accessories available everywhere

TITANIUM LINE CUTTER

Line cutter made of the best Beta Titanium alloy, with an abrasion resistance 5-6 times higher than other titanium alloys. Side aperture for cutting thick ropes or cords more easily.

STAINLESS STEEL SCISSORS

Robust tds scissors in stainless steel, to act as a cutting element quickly and safely. With his microdentate sheet, it acts on most materials effectively. Indispensable in the technical diving, cave divind and for aquatic rescue teams

DC18 DISC SAW DOA

The radial DC18 is the same tool as the DC14 and the DC16 but with a hydraulic motor to operate with a flow rate of 38L / min. The saw supports different sizes of discs: 300, 350, 400 and, to have several rotational speeds, it can work with a flow rate of 20, 30 or 40 L / min.

AS23 HYDRAULIC GRINDER DOA

AS23 is a compact angle sharpening saw which, thanks to its hydraulic operation, provides power, reduced noise, long life and maximum safety with the implicit impossibility of electric shock.