WELDING CLAMP EH400

The Hydroweld EH400 underwater welding gun is used throughout industry. Among its advantages, it should be noted that they are economical, very light and resistant. They are distributed together with a cable of approximately 2 meters and 50 mm2 terminated by a male Dinze type connector

BATICORROMETER - BASIC KIT

BathyCorrometers are used for polarization, corrosion and interaction studies, as part of their inspection control of production and drilling platforms; submarine gas pipelines; ship hulls; breakwaters and other maritime structures.

MULTIGAUGE 3000 ULTRASONIC DENSITY INDICATOR +...

The MULTIGAUGE 3000 Submarino indicator is a density measuring device designed for use by a diver, for the most common applications such as density measurement underwater. This is a simple and robust manual indicator, which uses multiple echo waves, ignoring coatings and only measuring the thickness of the remaining metal

WELDING CLAMP BR-21

BR21 broco type compression welding system is designed with superior features. The BR-21 is lightweight, rugged, and designed to hold the electrode at the optimum angle to reduce diver fatigue.

DPR-275 DIVER PINGER RECEIVER

This small and rugged handheld diver acoustic receiver with LCD display and signal strength meter can track and locate any acoustic pinger that operates between 5 to 80 kHz.

CYGNUS UNDERWATER

Cygnus' original diver-held subsea multiple-echo ultrasonic thickness meter, designed for use by divers undertaking subsea maintenance and surveys 3 decades ago… and today it is still an industry standard

ATT-400 ACOUSTIC TARGET TRANSPONDER

The ATT-400 transponder can operate underwater as a pinger or transponder. This underwater acoustic transponder is small and easy to deploy in depths of 1000m. When interrogated by the STI-350, DTI-300 or VADR series acoustic receivers, the ATT-400 provides range and bearing up to 750 meters away. The ATT-400 can also be programmed to operate as a free-running pinger. With a battery life of up to six months, this transponder is ideal for marking equipment and locations in poor visibility.

CYGNUS DIVE UNDERWATER

Providing an invaluable free hand while performing underwater ultrasonic thickness measurement, the Cygnus DIVE is a robust, wrist-mountable ultrasonic underwater thickness meter with a large, bright display with live A-scan making it easily viewable by both the diver and camera - even in the poorest visibility.

ULB-350 LOW COST LOCATION BEACON

This underwater beacon is a cost effective free-running pinger used for marking equipment and underwater sites to depths of 1,200m. Using a single 9-volt battery, the ULB-350 can send a continuous acoustic signal for up to 60 days or on a programmed time delay for up to three months.

DUSKY LASER

The Dusky Shark T2 Subsea Line Laser is used when measurements are needed from video images.