SUPER RAPTOR MONO GAS HYDRAULIC PLANT

SUPER Raptor is a hydraulic power generator with 18 HP twin cylinder gasoline engine. The machine is available on demand with flow rates ranging from 20 to 38 liters / min and pressures up to 210 bars, depending on the size of the pump installed (example: 30 liters at 175 bars or 38 liters at 140 bars ) .

DECO SMB 12 L

Semi-closed buoy, dimensions 133x23 cm, volume 12 litres, lined with reflexive tape, large bolt-snap integrated. material: high-frequency welded Nylon, stainless-steel AISI 316 weight: 0,39 kg

DUAL ELECTRIC RAPTOR HYDRAULIC PLANT

SUPER RAPTOR DUAL has a double hydraulic supply. It offers two circuits at 19 l / min each or a simple circuit at 38 l / min, both with a pressure of 140 bar.

HD13 HYDRAULIC HAMMER DRILL

13 kg hydraulic hammer drill for concrete, masonry and natural stone. Powerful and light, its use is ideal when performance, maneuverability and safety are required. The attack of the tops is the universal standard SDS MAX which allows to use a wide range tips and accessories available everywhere

WTX BACK PLATE STEEL

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

DIAMOND SIDEMOUNT COMPLETE

Sidemount DIAMOND complete system, our top quality product, CE certified!!! Contains of DIAMOND shaped wing and complete harness. Developed and tested by Czech best cave divers, used during our explorations on Yucatan, where we have 64 km long UW system - 4th longest on the world!

RK3 FIN

apeks rk3 fin: Designed in collaboration with the US military and renowned for outstanding performance and reliability, the Apeks RK3 is a rugged thermoplastic rubber fin featuring an over-sized foot pocket to accommodate drysuit boots and a spring strap for easy donning and doffing. The RK3 is available in three sizes: Medium, Large and Super.

WTX BACK PLATE ALUMINIUM

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

WSX-45 SIDEMOUNT FULL SET

Apeks' WSX-45 sidemount harness comes complete with the bladder, harness with crotch strap, D-rings, bungee and accessory butt pack.The bladder is constructed from Armoguard™, a super-tough material normally found in public safety diving and military products. This smooth material is ten times more abrasion resistant than standard CorduraTM (the material used on many other sidemount harness bladders), making this a wing designed with serious sidemount diving in mind.

DC18 DISC SAW DOA

The radial DC18 is the same tool as the DC14 and the DC16 but with a hydraulic motor to operate with a flow rate of 38L / min. The saw supports different sizes of discs: 300, 350, 400 and, to have several rotational speeds, it can work with a flow rate of 20, 30 or 40 L / min.

RK3 GREY HD FIN

apeks rk3 hd grey fin: The RK3 HD is the next fin in the RK3 range of fins. The RK3 HD is made from a higher density material than the standard RK3, which makes the fin stiffer and heavier. The RK3 HD was developed in response to feedback from divers who prefer a heavier fin. The new compound of the RK3 HD adds more weight to make it negatively buoyant. An ideal fin for dry suit diving.

KNIFE W/ POCKET

Pocket from polyamide strap, stainless-steel knife with jagged blade (50 mm).

REEL 60 M

Reel with a classic shape, manufactured from durable delrin. Delrin is used more and more often for manufacturing of diving equipment as its tensile properties, mechanical ruggedness and minimal absorbability. Weight of complete reel: 0,58 Kg / diameter: 100 mm / width: 50 mm

AS23 HYDRAULIC GRINDER DOA

AS23 is a compact angle sharpening saw which, thanks to its hydraulic operation, provides power, reduced noise, long life and maximum safety with the implicit impossibility of electric shock.

REEL 120 M

Reel with a classic shape, manufactured from durable delrin. Delrin is used more and more often for manufacturing of diving equipment as its tensile properties, mechanical ruggedness and minimal absorbability. Weight: 0,88 Kg diameter: 125 mm width: 58 mm

KV19 BREAKER DOA

KV19 hydraulic breaker Kg19 with “T type” anti vibration handles suspended on springs , tool is “operator friendly” and its use ideal in general demolition works of concrete and asphalt cutting. KV19 gives the best compromise between high power and manoeuvrability, can be powered by power pack sor by the hydraulic circuit of mini excavators, trucks or other machines with sufficient hydraulic circuit.

REEL W/KEVLAR LINE 200 M

Reel with a classic shape, manufactured from durable delrin. Delrin is used more and more often for manufacturing of diving equipment as its tensile properties, mechanical ruggedness and minimal absorbability. Weight: 1,18 Kg diameter: 140 mm width: 85 mm

SPOOL 33 M

The spool is made from one piece of very durable Delrin. Can be used as a decompression or safety spool. Consists of the spool cca 33 m of 2 mm PA line and short double-ender. Spool dimension is 76 mm and width 50 mm.

KIDDO WING 12 L RED

Lightweight ring model wing for juniors, volume 12 litres. Double-shell construction but the cover is made of lighter material Cordura 1000 red colour. Inflator end-piece is SHARK which is more suitable for smaller hands, softer to press the buttons

RING 14 WING

Circular style wing for diving with a single tank. Comes out from time proven double layer model CUB. Use for single tank 12 l. Part of the wing are also 2 pieces of rubber pins in the middle area of wing which allow to attach the single bottle WITHOUT the need to use single tank adapter.