AUV A18S

A18-S is the 3D image sonar configuration of the A18 autonomous underwater vehicle of the ECA Group. This AUV is designed to develop precision 3D inspections of the seabed. It is deployed from a surface vessel and an LARS allowing automatic recovery can be used. The vehicle operates autonomously at depths of 300 meters with 21 hours of battery life and is easy to transport by plane.

7 L ALUMINIUM CYLINDER WHITE WO/ VALVE 200 B

The range of aluminium cylinders offered by BtS Europa AG is produced by Luxfer Gas Cylinders either at their UK or US production plants. Luxfer Gas Cylinders is the world’s largest manufacturer of high pressure aluminium cylinders.

AUV ECA A-9S

A9-S is the portable configuration of the A9 autonomous underwater vehicle

STEEL 12 L 232 B LONG CONCAVE SINGLE

The range of steel cylinders offered by BtS Europa AG is produced by Eurocylinders System AG (ECS). ECS is one of the biggest and most efficient manufacturers of high pressure steel cylinders in Europe with an annual output of more than 500,000 cylinders. ECS manufactures on two production lines at their plant in Apolda, Germany. Cylinders are forged from 34CrMo4 steel.

AUV A18D

A18-D is the mid-size autonomous underwater vehicle of the ECA, AUV group for deep water applications. It is dedicated to the precise exploration of the seabed in 3D. It performs autonomous missions from a depth of  3000 m for up to  21 hours and is easy to transport by plane for missions abroad. This system can be delivered with an LARS which enables automatic underwater recovery and Triton Imaging software applications for further data processing.

WTX BACK PLATE STEEL

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

20 L 232 B STEEL CYLINDER WITHOUT VALVE

The range of steel cylinders offered by BtS Europa AG is produced by Eurocylinders System AG (ECS). ECS is one of the biggest and most efficient manufacturers of high pressure steel cylinders in Europe with an annual output of more than 500,000 cylinders. ECS manufactures on two production lines at their plant in Apolda, Germany. Cylinders are forged from 34CrMo4 steel.

AUV ECA A-9E

A9-E is the configuration of the autonomous autonomous vehicle A9 of the ECA group, AUV, for environmental monitoring. In addition to acquiring images of the seabed, it will record bathymetric data as well as environmental information such as water turbidity, conductivity, temperature, fluorescence, dissolved oxygen or pH. Mission planning and tracking is done through user-friendly software that lets you track the vehicle at all times during your mission.

RK3 FIN

apeks rk3 fin: Designed in collaboration with the US military and renowned for outstanding performance and reliability, the Apeks RK3 is a rugged thermoplastic rubber fin featuring an over-sized foot pocket to accommodate drysuit boots and a spring strap for easy donning and doffing. The RK3 is available in three sizes: Medium, Large and Super.

WTX BACK PLATE ALUMINIUM

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

WSX-45 SIDEMOUNT FULL SET

Apeks' WSX-45 sidemount harness comes complete with the bladder, harness with crotch strap, D-rings, bungee and accessory butt pack.The bladder is constructed from Armoguard™, a super-tough material normally found in public safety diving and military products. This smooth material is ten times more abrasion resistant than standard CorduraTM (the material used on many other sidemount harness bladders), making this a wing designed with serious sidemount diving in mind.

RK3 GREY HD FIN

apeks rk3 hd grey fin: The RK3 HD is the next fin in the RK3 range of fins. The RK3 HD is made from a higher density material than the standard RK3, which makes the fin stiffer and heavier. The RK3 HD was developed in response to feedback from divers who prefer a heavier fin. The new compound of the RK3 HD adds more weight to make it negatively buoyant. An ideal fin for dry suit diving.

TEK OX OXYGEN MONITORING

Oxygen analyzer for use with one hand, and designed specifically for the heavy conditions on the marine environment. Waterproof .Large digits

SPOOL BLUE 45 M

Inspired by technical diving and versatile enough to be used in a range of diving applications, the new LifeLine spool from Apeks features easy to grip flared sides to improve deployment and winding. Made from tough anodised aluminium alloy with high visibility line for low light conditions and with a super tough leader and swivel as standard, the Lifeline comes in three sizes and colours and is complemented by a range of line markers and cookies.

DECANTING HOSE AIR & OXYGEN

Decanting hose to use with air or oxygen. Up to 300 bar. NOTE: Is oxygen clean from factory, but if iused with air is necessary make a new clean for oxygen use.

AD300 OXYGEN MONITORING

Oxygen analyzer that provides exceptional flexibility and reliability.Using concepts of design and manufacturing techniques, the new microprocessor based in AX300 oxygen analyzer, offers unique features that distinguish it from its competitors.

3L STEEL SINGLE 232 B

The range of steel cylinders offered by BtS Europa AG is produced by Eurocylinders System AG (ECS). ECS is one of the biggest and most efficient manufacturers of high pressure steel cylinders in Europe with an annual output of more than 500,000 cylinders. ECS manufactures on two production lines at their plant in Apolda, Germany. Cylinders are forged from 34CrMo4 steel.