OPS CORE FAST BUMP HELMET

The FAST Bump high-cut helmet is designed for less extreme environments where ballistic threats are not a priority, and the focus is on protection against blunt trauma forces, or where the primary need is for integration of mission configured components.

OPS CORE FAST CARBON HELMET

    FAST tactical helmet with super high cut, anti-shock shell made with a hybrid uni-directional composite design of the most advanced carbon and fiberglass materials. Compatible with FAST helmet accessories and headband accessories.

    FLEX GLOVE 2 MM

    Super flexible 2 mm thick neoprene glove with inner and outer lycra lining and non-slip reinforced palm.

    WTX BACK PLATE STEEL

    The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

    RK3 FIN

    apeks rk3 fin: Designed in collaboration with the US military and renowned for outstanding performance and reliability, the Apeks RK3 is a rugged thermoplastic rubber fin featuring an over-sized foot pocket to accommodate drysuit boots and a spring strap for easy donning and doffing. The RK3 is available in three sizes: Medium, Large and Super.

    WTX BACK PLATE ALUMINIUM

    The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

    WSX-45 SIDEMOUNT FULL SET

    Apeks' WSX-45 sidemount harness comes complete with the bladder, harness with crotch strap, D-rings, bungee and accessory butt pack.The bladder is constructed from Armoguard™, a super-tough material normally found in public safety diving and military products. This smooth material is ten times more abrasion resistant than standard CorduraTM (the material used on many other sidemount harness bladders), making this a wing designed with serious sidemount diving in mind.

    RK3 GREY HD FIN

    apeks rk3 hd grey fin: The RK3 HD is the next fin in the RK3 range of fins. The RK3 HD is made from a higher density material than the standard RK3, which makes the fin stiffer and heavier. The RK3 HD was developed in response to feedback from divers who prefer a heavier fin. The new compound of the RK3 HD adds more weight to make it negatively buoyant. An ideal fin for dry suit diving.

    BR67 UNDERWATER BREAKER/DRIVER (With C.E.)

    The BR67 is a medium sized breaker in Stanley Hydraulic Tools line up of underwater paving breakers. The BR67is in the 70 lbs class of breakers and is used for medium concrete and rock breaking, coral removal and rod driving.

    TACTICAL LIGHT AQUAMAX DRYSUIT

    It is a multi-purpose drysuit, especially for special defuerza use when extreme lightness and tranpirability are required and for high temperature and high humidity environments.

    STEEL BOTTLE 5 L 200 Bar WITHOUT TAP

    Steel helmet of the Faber brand of 5 liters of capacity. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. Working pressure 200 Bar

    BR45 HYDRAULIC BREAKER (With C.E.)

    The BR45 is the smallest breaker in the Stanley Hydraulic Tool lineup of underwater breakers. The feathering on/off valve controls speed and allows easier initial tool placement. Standard 1" hex chuck and latch retainer. Painted hi‑visibility yellow.

    STEEL BOTTLE 10 L 200 Bar WITHOUT TAP

    10-liter capacity Faber brand steel helmet. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. Working pressure 200 Bar

    CH15 UNDERWATER CHIPPING HAMMER

    The Stanley Submarine CH15 Breaker Hammer is a lightweight yet powerful alternative to pneumatic tools. Designed for medium and heavy duty jobs, due to its high power to weight ratio the CH15 becomes the ideal tool for scuba divers working in concrete.

    WATERPROOF PACK BAGS

    Waterproof bags manufactured in a double layer construction to ensure maximum durability.The inner waterproof bag is a heavy duty rubberized fabric, which can be easily repaired. This bag is equipped with a corrugated hose included.

    BOTELLA ACERO 15 L 200 Bar S/GRIFO

    15 liter capacity Faber brand steel helmet. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. 200 Bar working pressure (makes it lighter than the 232 Bar model)

    CS11 UNDERWATER CHAIN SAW

    The CS11 Underwater Work Circular Saw is designed to cut any type of wooden structure underwater, including bridge piers, docks and jetties. It was created to provide the diver with a very high chain speed to easily cut even the sturdiest posts and pillars.

    copy of WATERPROOF PACK BAGS

    Waterproof bags manufactured inWP-CONSTANT FLOAT BAG consisting of two bags: the main outer bag with the ability to adjust buoyancy in the same way as a drysuit and the inner vacuum bag to stabilize the payload and prevent movement during pitching and rolling. a double layer construction to ensure maximum durability.

    STEEL BOTTLE 15 L 232 Bar WITHOUT TAP

    15 liter capacity Faber brand steel helmet. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. Working pressure 232 Bar