S.S. BACK PLATE

Heavy duty and designed to work with single tanks or doubles. Our Stainless steel plates will be the last plate you every buy. We stopped at no expense on this plate. We have added multiple mounting holes, waist band holes and accessory holes to maximize comfort and flexibility. All edges have been rounded over and polished so you will never have to worry about wear from the plate.

FLEX GLOVE 2 MM

Super flexible 2 mm thick neoprene glove with inner and outer lycra lining and non-slip reinforced palm.

ALUMINIUM BACK PLATE

Heavy duty and designed to work with single tanks or doubles. Our coated Aluminum plate is light weight but strong. It is perfect for people that travel or don’t need the weight of a SS plate. We have added multiple mounting holes, waist band holes and accessory holes to maximize comfort and flexibility. All edges have been rounded over and polished so you will never have to worry about wear from the plate.

DECO SMB CLOSED

This closed bottom 3.3 foot (1 meter) surface marker is made of high visibility yellow or orange airtight nylon. Inflated orally or by use of BC low pressure inflator hose.

WTX BACK PLATE STEEL

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

RK3 FIN

apeks rk3 fin: Designed in collaboration with the US military and renowned for outstanding performance and reliability, the Apeks RK3 is a rugged thermoplastic rubber fin featuring an over-sized foot pocket to accommodate drysuit boots and a spring strap for easy donning and doffing. The RK3 is available in three sizes: Medium, Large and Super.

WTX BACK PLATE ALUMINIUM

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

WSX-45 SIDEMOUNT FULL SET

Apeks' WSX-45 sidemount harness comes complete with the bladder, harness with crotch strap, D-rings, bungee and accessory butt pack.The bladder is constructed from Armoguard™, a super-tough material normally found in public safety diving and military products. This smooth material is ten times more abrasion resistant than standard CorduraTM (the material used on many other sidemount harness bladders), making this a wing designed with serious sidemount diving in mind.

RK3 GREY HD FIN

apeks rk3 hd grey fin: The RK3 HD is the next fin in the RK3 range of fins. The RK3 HD is made from a higher density material than the standard RK3, which makes the fin stiffer and heavier. The RK3 HD was developed in response to feedback from divers who prefer a heavier fin. The new compound of the RK3 HD adds more weight to make it negatively buoyant. An ideal fin for dry suit diving.

SLIPSTREAM JET FIN

An OMS favorite! Slipstream Fins are made with monoprene creating a lightweight but high performance fin. Made with a spring heel strap, Slipstream Fins give divers an easy donning fin that will also “deliver the goods” in any condition.

JET FIN SLIPSTREAM COLOR FIN

An OMS favorite! Slipstream Fins are made with monoprene creating a lightweight but high performance fin. Made with a spring heel strap, Slipstream Fins give divers an easy donning fin that will also “deliver the goods” in any condition.

7SEVEN DPV

Suex 7Seven Scuba Diving DPV: From SUEX’s recreational line, 7Seven is the most accessible underwater scooter for beginner divers. This entry-level model can operate at depths of up to 80 metres, with a maximum speed of 60 m/min and an autonomy of up to 75 minutes at cruising speed. It is compatible with air transport, for a worldwide diving experience.

STEEL BOTTLE 5 L 200 Bar WITHOUT TAP

Steel helmet of the Faber brand of 5 liters of capacity. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. Working pressure 200 Bar

VR-T DPV

Recreational DPV with two-speed control and HI-GR compound propeller. The VR-T uses a Nimh battery that recharges in just 4.5 hours and offers 100 minutes of autonomy at cruising speed and 60 minutes at a maximum speed of 65 m/min. VR-T is suitable for air travel, allowing the diver to travel around the world without worrying about logistics.

STEEL BOTTLE 10 L 200 Bar WITHOUT TAP

10-liter capacity Faber brand steel helmet. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. Working pressure 200 Bar

VR-X DPV

Suex VR-X DPV Scooter: The VR-X DPV scooter uses a Li-ION battery with external charging system, offering a capacity of 512 Wh for long dives of up to 150 minutes at cruising speed and 100 minutes at a maximum speed of 65 m/min. Controlling both the motor and the battery with the Calypso app gives divers a unique experience down to a depth of 101 metres.

XJ-T DPV

Suex XJ-T DPV Scooter: Underwater scooter for technical/professional use with aluminium body. The XJ-T underwater scooter uses a Nimh battery that recharges in just 4.5 hours and offers 75 minutes of autonomy at cruising speed and 35 minutes at a top speed of 85 m/min. The XJ-T can be stored in the aircraft hold for easy transport to any location and in all conditions.

BOTELLA ACERO 15 L 200 Bar S/GRIFO

15 liter capacity Faber brand steel helmet. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. 200 Bar working pressure (makes it lighter than the 232 Bar model)

SPRING HEELS

OMS Spring Heels can be worn with most fin types. OMS Spring Heels provide divers excellent fit and comfort and make the divers fins easy to put on and take off.

XJ-S DPV

Suex XJ-S DPV Scooter: Underwater scooter for technical/professional use with aluminium body. The XJ-S offers high capacity thanks to its Li-ION battery, which is monitored by a special indicator, the Calypso app and the Eron D-1, so the diver has full control over the 185 minutes of autonomy at cruising speed and 85 minutes at full speed (85 m/min) to reach a depth of 200 metres.