FLEX GLOVE 2 MM

Super flexible 2 mm thick neoprene glove with inner and outer lycra lining and non-slip reinforced palm.

WTX BACK PLATE STEEL

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

RK3 FIN

apeks rk3 fin: Designed in collaboration with the US military and renowned for outstanding performance and reliability, the Apeks RK3 is a rugged thermoplastic rubber fin featuring an over-sized foot pocket to accommodate drysuit boots and a spring strap for easy donning and doffing. The RK3 is available in three sizes: Medium, Large and Super.

WTX BACK PLATE ALUMINIUM

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

WSX-45 SIDEMOUNT FULL SET

Apeks' WSX-45 sidemount harness comes complete with the bladder, harness with crotch strap, D-rings, bungee and accessory butt pack.The bladder is constructed from Armoguard™, a super-tough material normally found in public safety diving and military products. This smooth material is ten times more abrasion resistant than standard CorduraTM (the material used on many other sidemount harness bladders), making this a wing designed with serious sidemount diving in mind.

RK3 GREY HD FIN

apeks rk3 hd grey fin: The RK3 HD is the next fin in the RK3 range of fins. The RK3 HD is made from a higher density material than the standard RK3, which makes the fin stiffer and heavier. The RK3 HD was developed in response to feedback from divers who prefer a heavier fin. The new compound of the RK3 HD adds more weight to make it negatively buoyant. An ideal fin for dry suit diving.

BR67 UNDERWATER BREAKER/DRIVER (With C.E.)

The BR67 is a medium sized breaker in Stanley Hydraulic Tools line up of underwater paving breakers. The BR67is in the 70 lbs class of breakers and is used for medium concrete and rock breaking, coral removal and rod driving.

7SEVEN DPV

Suex 7Seven Scuba Diving DPV: From SUEX’s recreational line, 7Seven is the most accessible underwater scooter for beginner divers. This entry-level model can operate at depths of up to 80 metres, with a maximum speed of 60 m/min and an autonomy of up to 75 minutes at cruising speed. It is compatible with air transport, for a worldwide diving experience.

STEEL BOTTLE 5 L 200 Bar WITHOUT TAP

Steel helmet of the Faber brand of 5 liters of capacity. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. Working pressure 200 Bar

BR45 HYDRAULIC BREAKER (With C.E.)

The BR45 is the smallest breaker in the Stanley Hydraulic Tool lineup of underwater breakers. The feathering on/off valve controls speed and allows easier initial tool placement. Standard 1" hex chuck and latch retainer. Painted hi‑visibility yellow.

VR-T DPV

Recreational DPV with two-speed control and HI-GR compound propeller. The VR-T uses a Nimh battery that recharges in just 4.5 hours and offers 100 minutes of autonomy at cruising speed and 60 minutes at a maximum speed of 65 m/min. VR-T is suitable for air travel, allowing the diver to travel around the world without worrying about logistics.

STEEL BOTTLE 10 L 200 Bar WITHOUT TAP

10-liter capacity Faber brand steel helmet. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. Working pressure 200 Bar

CH15 UNDERWATER CHIPPING HAMMER

The Stanley Submarine CH15 Breaker Hammer is a lightweight yet powerful alternative to pneumatic tools. Designed for medium and heavy duty jobs, due to its high power to weight ratio the CH15 becomes the ideal tool for scuba divers working in concrete.

VR-X DPV

Suex VR-X DPV Scooter: The VR-X DPV scooter uses a Li-ION battery with external charging system, offering a capacity of 512 Wh for long dives of up to 150 minutes at cruising speed and 100 minutes at a maximum speed of 65 m/min. Controlling both the motor and the battery with the Calypso app gives divers a unique experience down to a depth of 101 metres.

XJ-T DPV

Suex XJ-T DPV Scooter: Underwater scooter for technical/professional use with aluminium body. The XJ-T underwater scooter uses a Nimh battery that recharges in just 4.5 hours and offers 75 minutes of autonomy at cruising speed and 35 minutes at a top speed of 85 m/min. The XJ-T can be stored in the aircraft hold for easy transport to any location and in all conditions.

BOTELLA ACERO 15 L 200 Bar S/GRIFO

15 liter capacity Faber brand steel helmet. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. 200 Bar working pressure (makes it lighter than the 232 Bar model)

CS11 UNDERWATER CHAIN SAW

The CS11 Underwater Work Circular Saw is designed to cut any type of wooden structure underwater, including bridge piers, docks and jetties. It was created to provide the diver with a very high chain speed to easily cut even the sturdiest posts and pillars.

XJ-S DPV

Suex XJ-S DPV Scooter: Underwater scooter for technical/professional use with aluminium body. The XJ-S offers high capacity thanks to its Li-ION battery, which is monitored by a special indicator, the Calypso app and the Eron D-1, so the diver has full control over the 185 minutes of autonomy at cruising speed and 85 minutes at full speed (85 m/min) to reach a depth of 200 metres.

STEEL BOTTLE 15 L 232 Bar WITHOUT TAP

15 liter capacity Faber brand steel helmet. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. Working pressure 232 Bar

GR29 UNDERWATER GRINDER CE W/COUPLERS

The Stanley GR29 is a right angle sharpener that can be used for roughing and cleaning in underwater applications with a variety of discs, brushes and accessories