SUPER RAPTOR MONO GAS HYDRAULIC PLANT

SUPER Raptor is a hydraulic power generator with 18 HP twin cylinder gasoline engine. The machine is available on demand with flow rates ranging from 20 to 38 liters / min and pressures up to 210 bars, depending on the size of the pump installed (example: 30 liters at 175 bars or 38 liters at 140 bars ) .

DECO BUOY 30 LB

The AP Diving surface marker buoys can be inflated from a secondary air source, at any time during the dive to signal the end of it and mark the starting point .Also can be used as decompression globe.

DUAL ELECTRIC RAPTOR HYDRAULIC PLANT

SUPER RAPTOR DUAL has a double hydraulic supply. It offers two circuits at 19 l / min each or a simple circuit at 38 l / min, both with a pressure of 140 bar.

30 LB DECO BUOY RED-YELLOW

APSMBC - Self-sealing Surface Marker Buoy. The original Hi Viz self-sealing surface marker buoy. The SMBC can be inflated from a second stage air source. It can be inflated for the duration of the dive or used as a delayed-action deco buoy. A dump/over-pressure valve prevents over inflation and allows deflation after use.

HD13 HYDRAULIC HAMMER DRILL

13 kg hydraulic hammer drill for concrete, masonry and natural stone. Powerful and light, its use is ideal when performance, maneuverability and safety are required. The attack of the tops is the universal standard SDS MAX which allows to use a wide range tips and accessories available everywhere

INSPIRATION EVP REBREATHER

The Inspiration EVP is a hybrid unit offering advantages from both stable-mates. It features the longer duration scrubber of the XPD and the smaller cylinders (and therefore unit size) of the EVO. The Inspiration EVP is a very popular model - sport or technical, travel or expedition - it is an excellent all-rounder for divers who do a mix of dives or who want a smaller unit than the XPD while retaining its extended duration

INSPIRATION XPD REBREATHER

The Inspiration started the CCR revolution over 15 years ago and the Inspiration XPD is based on the original spec – the larger unit with a longer duration scrubber and 3 litre cylinders - ideal for deeper, longer duration diving or a series of shorter repeat dives. The Inspiration XPD is the expedition divers rebreather of choice

DC18 DISC SAW DOA

The radial DC18 is the same tool as the DC14 and the DC16 but with a hydraulic motor to operate with a flow rate of 38L / min. The saw supports different sizes of discs: 300, 350, 400 and, to have several rotational speeds, it can work with a flow rate of 20, 30 or 40 L / min.

AS23 HYDRAULIC GRINDER DOA

AS23 is a compact angle sharpening saw which, thanks to its hydraulic operation, provides power, reduced noise, long life and maximum safety with the implicit impossibility of electric shock.

KV19 BREAKER DOA

KV19 hydraulic breaker Kg19 with “T type” anti vibration handles suspended on springs , tool is “operator friendly” and its use ideal in general demolition works of concrete and asphalt cutting. KV19 gives the best compromise between high power and manoeuvrability, can be powered by power pack sor by the hydraulic circuit of mini excavators, trucks or other machines with sufficient hydraulic circuit.

CHEMGENE HLD4L DISINFECTANT (1 l)

Disinfectant for cleaning AP BCD Inner bladders, Valves, Hoses and Rebreather Counterlungs. Chemgene HLD4L Disinfectant has been chosen for its ability to destroy a wide variety of bacteria, viruses and fungi including Legionella, Weils disease, Hepatitis, Herpes, Influenza, TB and HIV

3 L STEEL OXYGEN CYLINDER W/ VALVE

3 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. Oxygen Clean Rebreather Cylinder Valve: DIN 5/8" BSP outlet, green hand wheel and green bump cap, M25 x 2 ISO

3 L STEEL DILUENT CYLINDER W/ VALVE

3 litre Steel Cylinder: WP 232 Bar, M25 x 2, c/w Diluent Sticker. Rebreather Diluent Cylinder Valve: DIN 5/8" BSP outlet, black hand wheel and black bump cap, M25 x 2 ISO

2 L STEEL OXYGEN CYLINDER W/ VALVE

2 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. Rebreather Oxygen Cylinder Valve: oxygen clean, DIN 5/8" BSP outlet, green hand wheel and green bump cap

2 L STEEL OXYGEN CYLINDER W/ M26 VALVE

2 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. M26 Rebreather Oxygen Cylinder Valve (2008 on Euro Spec): oxygen clean, M26 outlet, green hand wheel and green bump cap

2 L STEEL DILUENT CYLINDER W/ VALVE

2 litre Steel Diluent Cylinder: WP 232 Bar, M25 x 2, c/w multilingual "Compressed Gas / Breathing Air" cylinder sticker. Rebreather Diluent Cylinder Valve: DIN 5/8" BSP outlet, black hand wheel and black bump cap

1.5 L ALUMINIUM ARGON CYLINDER

1.5 litre Aluminium Cylinder complete with DIN/A-clamp Convertible X-Flow Valve. 28.5cm long x 11cm diam. Working Pressure 200 bar. Black hand-wheel

1.0 L ALUMINIUM ARGON CYLINDER

1.0 litre Aluminium Cylinder complete with DIN/A-clamp Convertible X-Flow Valve. 23cm long x 10cm diam. Working Pressure 200 bar. Black hand-wheel

OXYGEN 1st STAGE FOR APD REBREATHER

AP Diving first stage for oxygen , made with a new design. It is special for this brand rebreathers and is riding standard. Connection DIN 300 M25. Green indicator for Oxygen

OXYGEN 1st STAGE M26 FOR APD REBREATHER

AP Diving first stage for oxygen , made with a new design. It is special for this brand rebreathers and is included as standard. Connection DIN 300 M26. Green indicator for Oxygen

DILUENT 1st STAGE FOR APD REBREATHER

AP Diving first stage for diluent made with a new design. It is special for this brand rebreathers and is included as standard. Connection DIN 300.Swivel turret