SUPER RAPTOR MONO GAS HYDRAULIC PLANT

SUPER Raptor is a hydraulic power generator with 18 HP twin cylinder gasoline engine. The machine is available on demand with flow rates ranging from 20 to 38 liters / min and pressures up to 210 bars, depending on the size of the pump installed (example: 30 liters at 175 bars or 38 liters at 140 bars ) .

AUV A18S

A18-S is the 3D image sonar configuration of the A18 autonomous underwater vehicle of the ECA Group. This AUV is designed to develop precision 3D inspections of the seabed. It is deployed from a surface vessel and an LARS allowing automatic recovery can be used. The vehicle operates autonomously at depths of 300 meters with 21 hours of battery life and is easy to transport by plane.

AUV ECA A-9S

A9-S is the portable configuration of the A9 autonomous underwater vehicle

DUAL ELECTRIC RAPTOR HYDRAULIC PLANT

SUPER RAPTOR DUAL has a double hydraulic supply. It offers two circuits at 19 l / min each or a simple circuit at 38 l / min, both with a pressure of 140 bar.

AMPHIBIAN BOOT 6.5 MM

The Amphibian diving boots are designed for a diver who wants the ultimate in support and protection. A stable footbed and hardwearing moulded outsole make this ideal for regular shore diving.

HD13 HYDRAULIC HAMMER DRILL

13 kg hydraulic hammer drill for concrete, masonry and natural stone. Powerful and light, its use is ideal when performance, maneuverability and safety are required. The attack of the tops is the universal standard SDS MAX which allows to use a wide range tips and accessories available everywhere

AUV A18D

A18-D is the mid-size autonomous underwater vehicle of the ECA, AUV group for deep water applications. It is dedicated to the precise exploration of the seabed in 3D. It performs autonomous missions from a depth of  3000 m for up to  21 hours and is easy to transport by plane for missions abroad. This system can be delivered with an LARS which enables automatic underwater recovery and Triton Imaging software applications for further data processing.

GLOVE LINER GLOVE 5 MM

The 5mm gloves offer the warmth and comfort comparable only to thicker traditional gloves. Features include: stretch neoprene for fit and comfort, and a Thermoflex lining for warmth, sealed seams to minimise water ingress, easy donning minimalist design, and a carbonite finish for grip and durability.

AUV ECA A-9E

A9-E is the configuration of the autonomous autonomous vehicle A9 of the ECA group, AUV, for environmental monitoring. In addition to acquiring images of the seabed, it will record bathymetric data as well as environmental information such as water turbidity, conductivity, temperature, fluorescence, dissolved oxygen or pH. Mission planning and tracking is done through user-friendly software that lets you track the vehicle at all times during your mission.

GLOVE LINER GLOVE 3 MM

The 3mm gloves provide amazing warmth during a dive. The 3mm gloves give outstanding dexterity – ideal for photography and videography

DC18 DISC SAW DOA

The radial DC18 is the same tool as the DC14 and the DC16 but with a hydraulic motor to operate with a flow rate of 38L / min. The saw supports different sizes of discs: 300, 350, 400 and, to have several rotational speeds, it can work with a flow rate of 20, 30 or 40 L / min.

AS23 HYDRAULIC GRINDER DOA

AS23 is a compact angle sharpening saw which, thanks to its hydraulic operation, provides power, reduced noise, long life and maximum safety with the implicit impossibility of electric shock.

KV19 BREAKER DOA

KV19 hydraulic breaker Kg19 with “T type” anti vibration handles suspended on springs , tool is “operator friendly” and its use ideal in general demolition works of concrete and asphalt cutting. KV19 gives the best compromise between high power and manoeuvrability, can be powered by power pack sor by the hydraulic circuit of mini excavators, trucks or other machines with sufficient hydraulic circuit.

DRYBASE TOP UNDERSUIT

Designed with a looser fit, this top can be worn on the way to the dive and then worn as part of a layering system next to the skin. Flat seams make the top very comfortable and the wicking fabric keeps the skin warm and dry. Wear underneath your everyday clothes prior to the dive, and then there is no need to get changed completely, thus helping you to stay warmer beforehand.

DRYBASE LEGGINS UNDERSUIT

A high performance alternative to cotton underwear, these leggings provide enhanced thermal protection and keep the skin drier an more comfortable during the dive. A high waist, wide elasticated waistband and flat seams throughout maximise next to skin comfort.

ARCTIC 2 PIECES UNDERSUIT

The Arctic's two layers of high insulation, low bulk fabric, ensure exceptional levels of thermal protection. Constructed with comfort and utility in mind, the minimalist design provides outstanding performance under closer fitting neoprene drysuits. In a layering system , the Arctic is also suited for use underneath membrane and trilaminate suits

HALO 3D UNDERSUIT

Maximising thermal protection whilst minimising buoyancy, the HALO 3D has body mapped insulation, strategically placed to enhance protection when in horizontal trim. Designed for use underneath membrane and trilaminate suits, the HALO 3D is the perfect complement to our current range of drysuit thermal protection. In a layering combination with Xerotherm, HALO 3D is suitable for the harshest diving conditions on the planet.