SUPER RAPTOR MONO GAS HYDRAULIC PLANT

SUPER Raptor is a hydraulic power generator with 18 HP twin cylinder gasoline engine. The machine is available on demand with flow rates ranging from 20 to 38 liters / min and pressures up to 210 bars, depending on the size of the pump installed (example: 30 liters at 175 bars or 38 liters at 140 bars ) .

DECO BUOY 30 LB

The AP Diving surface marker buoys can be inflated from a secondary air source, at any time during the dive to signal the end of it and mark the starting point .Also can be used as decompression globe.

DUAL ELECTRIC RAPTOR HYDRAULIC PLANT

SUPER RAPTOR DUAL has a double hydraulic supply. It offers two circuits at 19 l / min each or a simple circuit at 38 l / min, both with a pressure of 140 bar.

30 LB DECO BUOY RED-YELLOW

APSMBC - Self-sealing Surface Marker Buoy. The original Hi Viz self-sealing surface marker buoy. The SMBC can be inflated from a second stage air source. It can be inflated for the duration of the dive or used as a delayed-action deco buoy. A dump/over-pressure valve prevents over inflation and allows deflation after use.

HD13 HYDRAULIC HAMMER DRILL

13 kg hydraulic hammer drill for concrete, masonry and natural stone. Powerful and light, its use is ideal when performance, maneuverability and safety are required. The attack of the tops is the universal standard SDS MAX which allows to use a wide range tips and accessories available everywhere

INSPIRATION EVP REBREATHER

The Inspiration EVP is a hybrid unit offering advantages from both stable-mates. It features the longer duration scrubber of the XPD and the smaller cylinders (and therefore unit size) of the EVO. The Inspiration EVP is a very popular model - sport or technical, travel or expedition - it is an excellent all-rounder for divers who do a mix of dives or who want a smaller unit than the XPD while retaining its extended duration

INSPIRATION XPD REBREATHER

The Inspiration started the CCR revolution over 15 years ago and the Inspiration XPD is based on the original spec – the larger unit with a longer duration scrubber and 3 litre cylinders - ideal for deeper, longer duration diving or a series of shorter repeat dives. The Inspiration XPD is the expedition divers rebreather of choice

DC18 DISC SAW DOA

The radial DC18 is the same tool as the DC14 and the DC16 but with a hydraulic motor to operate with a flow rate of 38L / min. The saw supports different sizes of discs: 300, 350, 400 and, to have several rotational speeds, it can work with a flow rate of 20, 30 or 40 L / min.

AS23 HYDRAULIC GRINDER DOA

AS23 is a compact angle sharpening saw which, thanks to its hydraulic operation, provides power, reduced noise, long life and maximum safety with the implicit impossibility of electric shock.

KV19 BREAKER DOA

KV19 hydraulic breaker Kg19 with “T type” anti vibration handles suspended on springs , tool is “operator friendly” and its use ideal in general demolition works of concrete and asphalt cutting. KV19 gives the best compromise between high power and manoeuvrability, can be powered by power pack sor by the hydraulic circuit of mini excavators, trucks or other machines with sufficient hydraulic circuit.

CHEMGENE HLD4L DISINFECTANT (1 l)

Disinfectant for cleaning AP BCD Inner bladders, Valves, Hoses and Rebreather Counterlungs. Chemgene HLD4L Disinfectant has been chosen for its ability to destroy a wide variety of bacteria, viruses and fungi including Legionella, Weils disease, Hepatitis, Herpes, Influenza, TB and HIV

ATT-400 ACOUSTIC TARGET TRANSPONDER

The ATT-400 transponder can operate underwater as a pinger or transponder. This underwater acoustic transponder is small and easy to deploy in depths of 1000m. When interrogated by the STI-350, DTI-300 or VADR series acoustic receivers, the ATT-400 provides range and bearing up to 750 meters away. The ATT-400 can also be programmed to operate as a free-running pinger. With a battery life of up to six months, this transponder is ideal for marking equipment and locations in poor visibility.

3 L STEEL OXYGEN CYLINDER W/ VALVE

3 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. Oxygen Clean Rebreather Cylinder Valve: DIN 5/8" BSP outlet, green hand wheel and green bump cap, M25 x 2 ISO

3 L STEEL DILUENT CYLINDER W/ VALVE

3 litre Steel Cylinder: WP 232 Bar, M25 x 2, c/w Diluent Sticker. Rebreather Diluent Cylinder Valve: DIN 5/8" BSP outlet, black hand wheel and black bump cap, M25 x 2 ISO

ULB-350 LOW COST LOCATION BEACON

This underwater beacon is a cost effective free-running pinger used for marking equipment and underwater sites to depths of 1,200m. Using a single 9-volt battery, the ULB-350 can send a continuous acoustic signal for up to 60 days or on a programmed time delay for up to three months.

DPR-275 DIVER PINGER RECEIVER

This small and rugged handheld diver acoustic receiver with LCD display and signal strength meter can track and locate any acoustic pinger that operates between 5 to 80 kHz.

2 L STEEL OXYGEN CYLINDER W/ VALVE

2 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. Rebreather Oxygen Cylinder Valve: oxygen clean, DIN 5/8" BSP outlet, green hand wheel and green bump cap

2 L STEEL OXYGEN CYLINDER W/ M26 VALVE

2 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. M26 Rebreather Oxygen Cylinder Valve (2008 on Euro Spec): oxygen clean, M26 outlet, green hand wheel and green bump cap

PRS275 PINGER RECEIVER SYSTEM

The PRS-275 is a diver pinger receiver that can be converted to surface pinger receiver using a separate directional hydrophone and user adjustable staff assembly. The system includes the DPR-275 diver pinger receiver, waterproof headset, adjustable staff assembly with directional hydrophone, cable assembly, and shipping container.

2 L STEEL DILUENT CYLINDER W/ VALVE

2 litre Steel Diluent Cylinder: WP 232 Bar, M25 x 2, c/w multilingual "Compressed Gas / Breathing Air" cylinder sticker. Rebreather Diluent Cylinder Valve: DIN 5/8" BSP outlet, black hand wheel and black bump cap