DECO SMB 12 L

Semi-closed buoy, dimensions 133x23 cm, volume 12 litres, lined with reflexive tape, large bolt-snap integrated. material: high-frequency welded Nylon, stainless-steel AISI 316 weight: 0,39 kg

FLEX GLOVE 2 MM

Super flexible 2 mm thick neoprene glove with inner and outer lycra lining and non-slip reinforced palm.

WTX BACK PLATE STEEL

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

DIAMOND SIDEMOUNT COMPLETE

Sidemount DIAMOND complete system, our top quality product, CE certified!!! Contains of DIAMOND shaped wing and complete harness. Developed and tested by Czech best cave divers, used during our explorations on Yucatan, where we have 64 km long UW system - 4th longest on the world!

RK3 FIN

apeks rk3 fin: Designed in collaboration with the US military and renowned for outstanding performance and reliability, the Apeks RK3 is a rugged thermoplastic rubber fin featuring an over-sized foot pocket to accommodate drysuit boots and a spring strap for easy donning and doffing. The RK3 is available in three sizes: Medium, Large and Super.

WTX BACK PLATE ALUMINIUM

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.

WSX-45 SIDEMOUNT FULL SET

Apeks' WSX-45 sidemount harness comes complete with the bladder, harness with crotch strap, D-rings, bungee and accessory butt pack.The bladder is constructed from Armoguard™, a super-tough material normally found in public safety diving and military products. This smooth material is ten times more abrasion resistant than standard CorduraTM (the material used on many other sidemount harness bladders), making this a wing designed with serious sidemount diving in mind.

RK3 GREY HD FIN

apeks rk3 hd grey fin: The RK3 HD is the next fin in the RK3 range of fins. The RK3 HD is made from a higher density material than the standard RK3, which makes the fin stiffer and heavier. The RK3 HD was developed in response to feedback from divers who prefer a heavier fin. The new compound of the RK3 HD adds more weight to make it negatively buoyant. An ideal fin for dry suit diving.

KNIFE W/ POCKET

Pocket from polyamide strap, stainless-steel knife with jagged blade (50 mm).

REEL 60 M

Reel with a classic shape, manufactured from durable delrin. Delrin is used more and more often for manufacturing of diving equipment as its tensile properties, mechanical ruggedness and minimal absorbability. Weight of complete reel: 0,58 Kg / diameter: 100 mm / width: 50 mm

REEL 120 M

Reel with a classic shape, manufactured from durable delrin. Delrin is used more and more often for manufacturing of diving equipment as its tensile properties, mechanical ruggedness and minimal absorbability. Weight: 0,88 Kg diameter: 125 mm width: 58 mm

REEL W/KEVLAR LINE 200 M

Reel with a classic shape, manufactured from durable delrin. Delrin is used more and more often for manufacturing of diving equipment as its tensile properties, mechanical ruggedness and minimal absorbability. Weight: 1,18 Kg diameter: 140 mm width: 85 mm

STEEL BOTTLE 5 L 200 Bar WITHOUT TAP

Steel helmet of the Faber brand of 5 liters of capacity. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. Working pressure 200 Bar

STEEL BOTTLE 10 L 200 Bar WITHOUT TAP

10-liter capacity Faber brand steel helmet. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. Working pressure 200 Bar

SPOOL 33 M

The spool is made from one piece of very durable Delrin. Can be used as a decompression or safety spool. Consists of the spool cca 33 m of 2 mm PA line and short double-ender. Spool dimension is 76 mm and width 50 mm.

KIDDO WING 12 L RED

Lightweight ring model wing for juniors, volume 12 litres. Double-shell construction but the cover is made of lighter material Cordura 1000 red colour. Inflator end-piece is SHARK which is more suitable for smaller hands, softer to press the buttons

BOTELLA ACERO 15 L 200 Bar S/GRIFO

15 liter capacity Faber brand steel helmet. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. 200 Bar working pressure (makes it lighter than the 232 Bar model)