AUV A18S

A18-S is the 3D image sonar configuration of the A18 autonomous underwater vehicle of the ECA Group. This AUV is designed to develop precision 3D inspections of the seabed. It is deployed from a surface vessel and an LARS allowing automatic recovery can be used. The vehicle operates autonomously at depths of 300 meters with 21 hours of battery life and is easy to transport by plane.

220/2 320 BAR BOOSTER FULL SET

Booster Pump NRC 220/2 320 bar complete set for military diving and rebreather: The Booster 220/2 in a 320 bar final pressure SET. Booster set ready to connect, in a watertight case. Use: rebreather divers for loading small cylinders (2-3 liters), stage-bailout cylinders and loading mixtures in bibottles.

DECO BUOY 30 LB

The AP Diving surface marker buoys can be inflated from a secondary air source, at any time during the dive to signal the end of it and mark the starting point .Also can be used as decompression globe.

AUV ECA A-9S

A9-S is the portable configuration of the A9 autonomous underwater vehicle

300/2 320 BAR BOOSTER FULL SET

Booster Pump NRC 300/2 320 bar complete set for technical diving and rebreather: The Booster 300/2 in a 320 bar final pressure SET. Booster set ready to connect, in a watertight case. Use: Commercial divers & Diving Centers

30 LB DECO BUOY RED-YELLOW

APSMBC - Self-sealing Surface Marker Buoy. The original Hi Viz self-sealing surface marker buoy. The SMBC can be inflated from a second stage air source. It can be inflated for the duration of the dive or used as a delayed-action deco buoy. A dump/over-pressure valve prevents over inflation and allows deflation after use.

AUV A18D

A18-D is the mid-size autonomous underwater vehicle of the ECA, AUV group for deep water applications. It is dedicated to the precise exploration of the seabed in 3D. It performs autonomous missions from a depth of  3000 m for up to  21 hours and is easy to transport by plane for missions abroad. This system can be delivered with an LARS which enables automatic underwater recovery and Triton Imaging software applications for further data processing.

INSPIRATION EVP REBREATHER

The Inspiration EVP is a hybrid unit offering advantages from both stable-mates. It features the longer duration scrubber of the XPD and the smaller cylinders (and therefore unit size) of the EVO. The Inspiration EVP is a very popular model - sport or technical, travel or expedition - it is an excellent all-rounder for divers who do a mix of dives or who want a smaller unit than the XPD while retaining its extended duration

AUV ECA A-9E

A9-E is the configuration of the autonomous autonomous vehicle A9 of the ECA group, AUV, for environmental monitoring. In addition to acquiring images of the seabed, it will record bathymetric data as well as environmental information such as water turbidity, conductivity, temperature, fluorescence, dissolved oxygen or pH. Mission planning and tracking is done through user-friendly software that lets you track the vehicle at all times during your mission.

INSPIRATION XPD REBREATHER

The Inspiration started the CCR revolution over 15 years ago and the Inspiration XPD is based on the original spec – the larger unit with a longer duration scrubber and 3 litre cylinders - ideal for deeper, longer duration diving or a series of shorter repeat dives. The Inspiration XPD is the expedition divers rebreather of choice

CHEMGENE HLD4L DISINFECTANT (1 l)

Disinfectant for cleaning AP BCD Inner bladders, Valves, Hoses and Rebreather Counterlungs. Chemgene HLD4L Disinfectant has been chosen for its ability to destroy a wide variety of bacteria, viruses and fungi including Legionella, Weils disease, Hepatitis, Herpes, Influenza, TB and HIV

NRC PICK O2 OXYGEN ANALIZER

Portable oxygen analyzer small sized, to measure the oxygen concentration. Measurement Range: 0-99 vol% O2 Resolution: 1 Vol%. Measuring Time: 1 Sec

3 L STEEL OXYGEN CYLINDER W/ VALVE

3 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. Oxygen Clean Rebreather Cylinder Valve: DIN 5/8" BSP outlet, green hand wheel and green bump cap, M25 x 2 ISO

3 L STEEL DILUENT CYLINDER W/ VALVE

3 litre Steel Cylinder: WP 232 Bar, M25 x 2, c/w Diluent Sticker. Rebreather Diluent Cylinder Valve: DIN 5/8" BSP outlet, black hand wheel and black bump cap, M25 x 2 ISO

2 L STEEL OXYGEN CYLINDER W/ VALVE

2 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. Rebreather Oxygen Cylinder Valve: oxygen clean, DIN 5/8" BSP outlet, green hand wheel and green bump cap

2 L STEEL OXYGEN CYLINDER W/ M26 VALVE

2 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. M26 Rebreather Oxygen Cylinder Valve (2008 on Euro Spec): oxygen clean, M26 outlet, green hand wheel and green bump cap

2 L STEEL DILUENT CYLINDER W/ VALVE

2 litre Steel Diluent Cylinder: WP 232 Bar, M25 x 2, c/w multilingual "Compressed Gas / Breathing Air" cylinder sticker. Rebreather Diluent Cylinder Valve: DIN 5/8" BSP outlet, black hand wheel and black bump cap

1.5 L ALUMINIUM ARGON CYLINDER

1.5 litre Aluminium Cylinder complete with DIN/A-clamp Convertible X-Flow Valve. 28.5cm long x 11cm diam. Working Pressure 200 bar. Black hand-wheel

1.0 L ALUMINIUM ARGON CYLINDER

1.0 litre Aluminium Cylinder complete with DIN/A-clamp Convertible X-Flow Valve. 23cm long x 10cm diam. Working Pressure 200 bar. Black hand-wheel