AUV A18S

A18-S is the 3D image sonar configuration of the A18 autonomous underwater vehicle of the ECA Group. This AUV is designed to develop precision 3D inspections of the seabed. It is deployed from a surface vessel and an LARS allowing automatic recovery can be used. The vehicle operates autonomously at depths of 300 meters with 21 hours of battery life and is easy to transport by plane.

AUV ECA A-9S

A9-S is the portable configuration of the A9 autonomous underwater vehicle

AMPHIBIAN BOOT 6.5 MM

The Amphibian diving boots are designed for a diver who wants the ultimate in support and protection. A stable footbed and hardwearing moulded outsole make this ideal for regular shore diving.

AUV A18D

A18-D is the mid-size autonomous underwater vehicle of the ECA, AUV group for deep water applications. It is dedicated to the precise exploration of the seabed in 3D. It performs autonomous missions from a depth of  3000 m for up to  21 hours and is easy to transport by plane for missions abroad. This system can be delivered with an LARS which enables automatic underwater recovery and Triton Imaging software applications for further data processing.

GLOVE LINER GLOVE 5 MM

The 5mm gloves offer the warmth and comfort comparable only to thicker traditional gloves. Features include: stretch neoprene for fit and comfort, and a Thermoflex lining for warmth, sealed seams to minimise water ingress, easy donning minimalist design, and a carbonite finish for grip and durability.

AUV ECA A-9E

A9-E is the configuration of the autonomous autonomous vehicle A9 of the ECA group, AUV, for environmental monitoring. In addition to acquiring images of the seabed, it will record bathymetric data as well as environmental information such as water turbidity, conductivity, temperature, fluorescence, dissolved oxygen or pH. Mission planning and tracking is done through user-friendly software that lets you track the vehicle at all times during your mission.

GLOVE LINER GLOVE 3 MM

The 3mm gloves provide amazing warmth during a dive. The 3mm gloves give outstanding dexterity – ideal for photography and videography

DRYBASE TOP UNDERSUIT

Designed with a looser fit, this top can be worn on the way to the dive and then worn as part of a layering system next to the skin. Flat seams make the top very comfortable and the wicking fabric keeps the skin warm and dry. Wear underneath your everyday clothes prior to the dive, and then there is no need to get changed completely, thus helping you to stay warmer beforehand.

DRYBASE LEGGINS UNDERSUIT

A high performance alternative to cotton underwear, these leggings provide enhanced thermal protection and keep the skin drier an more comfortable during the dive. A high waist, wide elasticated waistband and flat seams throughout maximise next to skin comfort.

ARCTIC 2 PIECES UNDERSUIT

The Arctic's two layers of high insulation, low bulk fabric, ensure exceptional levels of thermal protection. Constructed with comfort and utility in mind, the minimalist design provides outstanding performance under closer fitting neoprene drysuits. In a layering system , the Arctic is also suited for use underneath membrane and trilaminate suits

HALO 3D UNDERSUIT

Maximising thermal protection whilst minimising buoyancy, the HALO 3D has body mapped insulation, strategically placed to enhance protection when in horizontal trim. Designed for use underneath membrane and trilaminate suits, the HALO 3D is the perfect complement to our current range of drysuit thermal protection. In a layering combination with Xerotherm, HALO 3D is suitable for the harshest diving conditions on the planet.