S.S. BACK PLATE

Heavy duty and designed to work with single tanks or doubles. Our Stainless steel plates will be the last plate you every buy. We stopped at no expense on this plate. We have added multiple mounting holes, waist band holes and accessory holes to maximize comfort and flexibility. All edges have been rounded over and polished so you will never have to worry about wear from the plate.

AMPHIBIAN BOOT 6.5 MM

The Amphibian diving boots are designed for a diver who wants the ultimate in support and protection. A stable footbed and hardwearing moulded outsole make this ideal for regular shore diving.

ALUMINIUM BACK PLATE

Heavy duty and designed to work with single tanks or doubles. Our coated Aluminum plate is light weight but strong. It is perfect for people that travel or don’t need the weight of a SS plate. We have added multiple mounting holes, waist band holes and accessory holes to maximize comfort and flexibility. All edges have been rounded over and polished so you will never have to worry about wear from the plate.

GLOVE LINER GLOVE 5 MM

The 5mm gloves offer the warmth and comfort comparable only to thicker traditional gloves. Features include: stretch neoprene for fit and comfort, and a Thermoflex lining for warmth, sealed seams to minimise water ingress, easy donning minimalist design, and a carbonite finish for grip and durability.

DECO SMB CLOSED

This closed bottom 3.3 foot (1 meter) surface marker is made of high visibility yellow or orange airtight nylon. Inflated orally or by use of BC low pressure inflator hose.

GLOVE LINER GLOVE 3 MM

The 3mm gloves provide amazing warmth during a dive. The 3mm gloves give outstanding dexterity – ideal for photography and videography

SLIPSTREAM JET FIN

An OMS favorite! Slipstream Fins are made with monoprene creating a lightweight but high performance fin. Made with a spring heel strap, Slipstream Fins give divers an easy donning fin that will also “deliver the goods” in any condition.

JET FIN SLIPSTREAM COLOR FIN

An OMS favorite! Slipstream Fins are made with monoprene creating a lightweight but high performance fin. Made with a spring heel strap, Slipstream Fins give divers an easy donning fin that will also “deliver the goods” in any condition.

SPRING HEELS

OMS Spring Heels can be worn with most fin types. OMS Spring Heels provide divers excellent fit and comfort and make the divers fins easy to put on and take off.

BASIC DIR HARNESS

This basic harness uses 25 feet of 2 inch nylon webbing material, 3 stainless steel D-rings with weight stops are included. Two at chest level and one on the waist. Easily repositioned for optimal configuration with an OMS Stainless Steel buckle. A 2 inch sewn crotch strap with a 2 inch Scooter “D” ring is also included. This harness is available to be installed on a diver’s backplate or on the OMS Aluminum or Stainless Steel backplates. Divers that prefer the simplest, most utilitarian harness generally choose this configuration. Available as a Kit or installed on OMS Backplates

TRIM WEIGHT POCKET

Designed to be mounted on 2 inch webbing, vertically or horizontally. Can be used on nylon tank bands to augment the divers trim.

DRYBASE TOP UNDERSUIT

Designed with a looser fit, this top can be worn on the way to the dive and then worn as part of a layering system next to the skin. Flat seams make the top very comfortable and the wicking fabric keeps the skin warm and dry. Wear underneath your everyday clothes prior to the dive, and then there is no need to get changed completely, thus helping you to stay warmer beforehand.

DRYBASE LEGGINS UNDERSUIT

A high performance alternative to cotton underwear, these leggings provide enhanced thermal protection and keep the skin drier an more comfortable during the dive. A high waist, wide elasticated waistband and flat seams throughout maximise next to skin comfort.

ARCTIC 2 PIECES UNDERSUIT

The Arctic's two layers of high insulation, low bulk fabric, ensure exceptional levels of thermal protection. Constructed with comfort and utility in mind, the minimalist design provides outstanding performance under closer fitting neoprene drysuits. In a layering system , the Arctic is also suited for use underneath membrane and trilaminate suits

TRIESTE WING 94 LB TWIN

The Trieste Double Bladder Wings are designed for the diver that prefers a wing with a redundant bladder. The secondary bladder is designed to ensure proper buoyancy control in the event of primary bladder failure. Horseshoe style, redundant wings are the choice wing picked by divers that are not wearing a drysuit. The redundant bladder is utilized in the rare event that the primary bladder is rendered unusable. The power/oral inflator is the same on both bladders. Overpressure valves are located on the respective sides of each bladder.

HALO 3D UNDERSUIT

Maximising thermal protection whilst minimising buoyancy, the HALO 3D has body mapped insulation, strategically placed to enhance protection when in horizontal trim. Designed for use underneath membrane and trilaminate suits, the HALO 3D is the perfect complement to our current range of drysuit thermal protection. In a layering combination with Xerotherm, HALO 3D is suitable for the harshest diving conditions on the planet.

PERFORMANCE WING 32 LB SINGLE

The Performance Mono Wing is a donut-style wing allowing quick and easy movement of air from one side of the air cell to the other. It also has stabilizing bars built into the wing to reduce tank shifting during the dive. This is the ideal wing for the traveling diver as it is small, lightweight and easy to pack. The Mono wing will fit onto the IQ pac, Aluminum or Stainless Steel Backplate using the Comfort harness II or Continuous weave (Dir) harness.

PERFORMANCE WING 45 LB DOUBLE

The Performance Double Wing is a donut-style wing allowing quick and easy movement of air from one side of the air cell to the other and is designed specifically for use with double tanks. Donut configuration allows air to travel from one side of the air cell to the other easily, this reduces the possibility of air trapping on one side of the wing.

TRIESTE WING 60 LB TWIN

The Trieste Double Bladder Wings are designed for the diver that prefers a wing with a redundant bladder. The secondary bladder is designed to ensure proper buoyancy control in the event of primary bladder failure. Horseshoe style, redundant wings are the choice wing picked by divers that are not wearing a drysuit. The redundant bladder is utilized in the rare event that the primary bladder is rendered unusable. The power/oral inflator is the same on both bladders. Overpressure valves are located on the respective sides of each bladder.