DECO BUOY 30 LB

The AP Diving surface marker buoys can be inflated from a secondary air source, at any time during the dive to signal the end of it and mark the starting point .Also can be used as decompression globe.

30 LB DECO BUOY RED-YELLOW

APSMBC - Self-sealing Surface Marker Buoy. The original Hi Viz self-sealing surface marker buoy. The SMBC can be inflated from a second stage air source. It can be inflated for the duration of the dive or used as a delayed-action deco buoy. A dump/over-pressure valve prevents over inflation and allows deflation after use.

FLEX GLOVE 2 MM

Super flexible 2 mm thick neoprene glove with inner and outer lycra lining and non-slip reinforced palm.

INSPIRATION EVP REBREATHER

The Inspiration EVP is a hybrid unit offering advantages from both stable-mates. It features the longer duration scrubber of the XPD and the smaller cylinders (and therefore unit size) of the EVO. The Inspiration EVP is a very popular model - sport or technical, travel or expedition - it is an excellent all-rounder for divers who do a mix of dives or who want a smaller unit than the XPD while retaining its extended duration

INSPIRATION XPD REBREATHER

The Inspiration started the CCR revolution over 15 years ago and the Inspiration XPD is based on the original spec – the larger unit with a longer duration scrubber and 3 litre cylinders - ideal for deeper, longer duration diving or a series of shorter repeat dives. The Inspiration XPD is the expedition divers rebreather of choice

CHEMGENE HLD4L DISINFECTANT (1 l)

Disinfectant for cleaning AP BCD Inner bladders, Valves, Hoses and Rebreather Counterlungs. Chemgene HLD4L Disinfectant has been chosen for its ability to destroy a wide variety of bacteria, viruses and fungi including Legionella, Weils disease, Hepatitis, Herpes, Influenza, TB and HIV

STEEL BOTTLE 5 L 200 Bar WITHOUT TAP

Steel helmet of the Faber brand of 5 liters of capacity. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. Working pressure 200 Bar

STEEL BOTTLE 10 L 200 Bar WITHOUT TAP

10-liter capacity Faber brand steel helmet. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. Working pressure 200 Bar

BOTELLA ACERO 15 L 200 Bar S/GRIFO

15 liter capacity Faber brand steel helmet. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. 200 Bar working pressure (makes it lighter than the 232 Bar model)

STEEL BOTTLE 15 L 232 Bar WITHOUT TAP

15 liter capacity Faber brand steel helmet. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. Working pressure 232 Bar

BOTELLA ACERO 18 L 220 Bar S/GRIFO

Steel helmet of the Faber brand of 18 liters of capacity. Finished in white and black paint, with 25x2 metric neck thread, complying with the EN-144 standard. Working pressure 220 Bar

3 L STEEL OXYGEN CYLINDER W/ VALVE

3 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. Oxygen Clean Rebreather Cylinder Valve: DIN 5/8" BSP outlet, green hand wheel and green bump cap, M25 x 2 ISO

3 L STEEL DILUENT CYLINDER W/ VALVE

3 litre Steel Cylinder: WP 232 Bar, M25 x 2, c/w Diluent Sticker. Rebreather Diluent Cylinder Valve: DIN 5/8" BSP outlet, black hand wheel and black bump cap, M25 x 2 ISO

2 L STEEL OXYGEN CYLINDER W/ VALVE

2 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. Rebreather Oxygen Cylinder Valve: oxygen clean, DIN 5/8" BSP outlet, green hand wheel and green bump cap

2 L STEEL OXYGEN CYLINDER W/ M26 VALVE

2 litre Steel Oxygen Cylinder: WP 232 Bar, M25 x 2, c/w Oxygen Sticker. M26 Rebreather Oxygen Cylinder Valve (2008 on Euro Spec): oxygen clean, M26 outlet, green hand wheel and green bump cap

2 L STEEL DILUENT CYLINDER W/ VALVE

2 litre Steel Diluent Cylinder: WP 232 Bar, M25 x 2, c/w multilingual "Compressed Gas / Breathing Air" cylinder sticker. Rebreather Diluent Cylinder Valve: DIN 5/8" BSP outlet, black hand wheel and black bump cap

1.5 L ALUMINIUM ARGON CYLINDER

1.5 litre Aluminium Cylinder complete with DIN/A-clamp Convertible X-Flow Valve. 28.5cm long x 11cm diam. Working Pressure 200 bar. Black hand-wheel

1.0 L ALUMINIUM ARGON CYLINDER

1.0 litre Aluminium Cylinder complete with DIN/A-clamp Convertible X-Flow Valve. 23cm long x 10cm diam. Working Pressure 200 bar. Black hand-wheel