copy of ALUMINIUM BACK PLATE
tds aluminium back plate: Anodized Aluminum Back Plate from TDS. Holes that let you adjust in two different heights. Perforations to pass the single tank straps. Multiple holes for different accessories.
tds aluminium back plate: Anodized Aluminum Back Plate from TDS. Holes that let you adjust in two different heights. Perforations to pass the single tank straps. Multiple holes for different accessories.
High pressure hose for pressure gauge 15 cm length. Special to set the pressure gauge on the regulator of stage or bailout tank or in sidemount configurations.
Stainless Steel Back Plate from TDS.Compatible with all DTD accessories. Holes that let adjust in two different heights. Perforations to pass the single tank straps.
High pressure hose for pressure gauge 18 cm length. Special to set the pressure gauge on side stage or bailout tank regulator.
TDS Anodized Aluminum Reduced Back Plate. Ideal for travel thanks to its light weight: only 500 g. Perimeter edges and perforations completely beveled to avoid damaging equipment and harness straps.
HP high pressure hose for pressure gauge 65 cm length. Connect the first stage regulator with a pressure gauge.
HP high pressure hose for pressure gauge 70 cm length. Connect the first stage regulator with a pressure gauge.
HP high pressure hose for pressure gauge 80 cm length. Connect the first stage regulator with a pressure gauge.
HP high pressure hose for pressure gauge 110 cm length. Connect the first stage regulator with a pressure gauge.
LP Low pressure hose 20 cm length with pipe clip to attach to a low pressure inflator . Especially for sidemount.
LP Low pressure hose with racord to attach to on low pressure inflator BPI, 55 cm length.
LP Low pressure hose for regulator 60 cm length. Connecting the first stage to the second stage regulator.
Plate for mounting a single bottle on back plate, in polished aluminum. Includes set of two bottle straps with stainless steel buckle. Also includes a complete set of screws with spherical head, square body to avoid turning when tightening, washers and wing nuts. Approximate weight of the set 1 kg
LP low pressure regulator hose 100 cm length. Connecting the first stage to the second stage regulator.
Suex 7Seven Scuba Diving DPV: From SUEX’s recreational line, 7Seven is the most accessible underwater scooter for beginner divers. This entry-level model can operate at depths of up to 80 metres, with a maximum speed of 60 m/min and an autonomy of up to 75 minutes at cruising speed. It is compatible with air transport, for a worldwide diving experience.
LP low pressure regulator hose 150 cm length. Connecting the first stage to the second stage regulator.
Recreational DPV with two-speed control and HI-GR compound propeller. The VR-T uses a Nimh battery that recharges in just 4.5 hours and offers 100 minutes of autonomy at cruising speed and 60 minutes at a maximum speed of 65 m/min. VR-T is suitable for air travel, allowing the diver to travel around the world without worrying about logistics.