copy of ALUMINIUM BACK PLATE

tds aluminium back plate: Anodized Aluminum Back Plate from TDS. Holes that let you adjust in two different heights. Perforations to pass the single tank straps. Multiple holes for different accessories.

HP GAUGE HOSE 15 Cm

High pressure hose for pressure gauge 15 cm length. Special to set the pressure gauge on the regulator of stage or bailout tank or in sidemount configurations.

ECOBLENDER 1000 NITROX BLENDER

Simple Nitrox blender. The perfect solution for the private individual. The analysis of the rate of oxygen is made by connecting the OxyTester unit on the analysis base. The gas injection is made trough a manoregulator gone up the gas tank and a flow regulator which are supplied.

copy of S.S. BACK PLATE

Stainless Steel Back Plate from TDS.Compatible with all DTD accessories. Holes that let adjust in two different heights. Perforations to pass the single tank straps.

PRESSURE GAUGE HP HOSE 18 CM

High pressure hose for pressure gauge 18 cm length. Special to set the pressure gauge on side stage or bailout tank regulator.

SECUBLENDER 1000 NITROX BLENDER

Nitrox blender with electro-valve which cut the arrival of oxygen in case of stop of the compressor. The analysis of the rate of oxygen is made by connecting the OxyTester unit on the analysis base.

THOR 1600 G HD DRYSUIT

Northern Diver Thor 1600g HD Drysuit: The Northendiver Thor 1600 drysuit is constructed from vulcanized rubber and features vulcanized laminated polymers made on a 4-way multidirectional polyester fabric that provides greater strength and durability

ALUMINIUM BACKPLATE LIGHT BLACK

TDS Anodized Aluminum Reduced Back Plate. Ideal for travel thanks to its light weight: only 500 g. Perimeter edges and perforations completely beveled to avoid damaging equipment and harness straps.

HP GAUGE HOSE 65 CM

HP high pressure hose for pressure gauge 65 cm length. Connect the first stage regulator with a pressure gauge.

NORWAY DRYSUIT

The TDS Norway drysuit, along with its twin the Quebec, are the range in compressed neoprene of TDS watertight suits. The Norway model, is the variant more directed towards the technical diver, which stands out for incorporating a pocket of ample dimensions and a closure in feet of sock type to be able to use with a Rock boot to taste and making the whole suit lighter, also making possible to be able to turn the suit of complete menara.

HP HOSE FOR GAUGE 70 CM

HP high pressure hose for pressure gauge 70 cm length. Connect the first stage regulator with a pressure gauge.

PROBLENDER 1000 NITROX BLENDER

The best solution to blend Nitrox while emptying B50 safety. Allows to blend any Nitrox up to 40 % of O2. The technique consists in mixing the Nitrox before passing it through the compressor. It is for this reason that we can not exceed 40 % of O2.

S.S. BACK PLATE

Heavy duty and designed to work with single tanks or doubles. Our Stainless steel plates will be the last plate you every buy. We stopped at no expense on this plate. We have added multiple mounting holes, waist band holes and accessory holes to maximize comfort and flexibility. All edges have been rounded over and polished so you will never have to worry about wear from the plate.

QUEBEC DRYSUIT

The TDS Quebec drysuit, along with its twin the Norway, are the compressed neoprene range of TDS drysuits. The Quebec model includes a boot with a very light rigid sole, a feature that makes it very appreciated even by professional and commercial divers in their work. It also has a large pocket and flexible knee pads for protection.

HP GAUGE HOSE 80 CM

HP high pressure hose for pressure gauge 80 cm length. Connect the first stage regulator with a pressure gauge.

PROBLENDER 1000 TRIMIX BLENDER

The solution to mix Nitrox, Trimix, Triox and Héliox while emptying B50. Allows to mix any Nitrox, Trimix, Triox and Héliox having a maximal rate of 40% of O2. The technic consists in making Nitrox, Trimix, Triox or Héliox before compressing it by the mean of the compressor. That is why we must not exceed 40% of O2.

ALUMINIUM BACK PLATE

Heavy duty and designed to work with single tanks or doubles. Our coated Aluminum plate is light weight but strong. It is perfect for people that travel or don’t need the weight of a SS plate. We have added multiple mounting holes, waist band holes and accessory holes to maximize comfort and flexibility. All edges have been rounded over and polished so you will never have to worry about wear from the plate.

HP GAUGE HOSE 110 CM

HP high pressure hose for pressure gauge 110 cm length. Connect the first stage regulator with a pressure gauge.

WTX BACK PLATE STEEL

The WTX and WTX-D Series is a selection of harnesses, buoyancy cells and accessories which offer unparalleled versatility due to the modular nature of the whole system. Each component can be configured into a highly technical rig for those trained to push the limits, or scaled down to make a travel friendly set up suitable for any diver.