Active filters
LATEST NEWS
Siel GBS Booster Recharging Oxygen System for Military Diving: Portable Oxygen Filling System, Portable oxygen filling system represents the ideal portable base for oxygen rebreather recharging. It has been designed and produced following the best European standards and in accordance with all the safety guidelines.
Robust and equipped with a reinforced sole, the Omaha Zero TDS Boot is designed for use with drysuits provided with a sock-shaped foot and has a whole series of technical characteristics allowing it to perform its function perfectly.
tds iron wing 16 l: Donut wing type from tds iron model 16 l capacity and with 1000 denier nylon, double polyurethane bladder. Suitable for single tank diving.
Pressure gauge in high quality metal housing and highly resistant mineral glass.Metalic and mineral glass finish.Scale up to 400 bar
Donut wing type 20 l capacity with 1000 deniers, double polyurethane bladder. Suitable for diving with double tanks.
High quality pressure gauge with metal body and side handle, specially designed for diving in sidemount. Finished in metal and mineral glass. Scale up to 400 bar.
Stiff-soled boots made of 2.5 mm neoprene with double lining and polyester. For use with dry suits with socks. Insole and midsole with drainage water holes. Set by laces
Booster Pump NRC 220/2 320 bar complete set for military diving and rebreather: The Booster 220/2 in a 320 bar final pressure SET. Booster set ready to connect, in a watertight case. Use: rebreather divers for loading small cylinders (2-3 liters), stage-bailout cylinders and loading mixtures in bibottles.
The TDS PY63 press gauge is specially designed for stage tanks; its main characteristic is that it has an expanded diameter of 63 mm (unlike standard gauges that have average 52 mm). The scale is enhanced by this larger diameter and also has the novelty that the mark of 100 bars is in the vertical, which helps in low visibility conditions and the backlit display, the needle is perfectly distinguishable.
Booster Pump NRC 300/2 320 bar complete set for technical diving and rebreather: The Booster 300/2 in a 320 bar final pressure SET. Booster set ready to connect, in a watertight case. Use: Commercial divers & Diving Centers
Equipped with hard metal back (stainless steel or aluminum), they are designed for technical divers that enjoy the deep dives with big or double cylinders that need more thrust.
Pressure gauge with metal body and up to 400 bar scale, ultra-resistant and durable due to to the protective rubber that covers it. Includes 80 cm length high-pressure hose.
Equipped with hard metal back (stainless steel or aluminum), they are designed for technical divers that enjoy the deep dives with big or double cylinders that need more thrust.
Equipped with hard metal back (stainless steel), they are designed for technical divers that enjoy the deep dives with big or double cylinders that need more thrust.
Surface gauge for checking pressure out of the water bottles. DIN system. Purge by knob. Dial easy to read. Scale up to 400 bar. Is clean for use with oxygen, but if used with air the O2 service is lost.
Equipped with hard metal back (stainless steel or aluminum), they are designed for technical divers that enjoy the deep dives with big or double cylinders that need more thrust.
New model tds diving compass pro liquid filled wrist in Bungee version (also available in rubber strap version). Redesigned quick response even in readings with up to 30 degrees.
Equipped with hard metal back (stainless steel or aluminum), they are designed for technical divers that enjoy the deep dives with big or double cylinders that need more thrust.
Cookie preferences
