GBS RECHARGING OXYGEN SYSTEM

Siel GBS Booster Recharging Oxygen System for Military Diving: Portable Oxygen Filling System, Portable oxygen filling system represents the ideal portable base for oxygen rebreather recharging. It has been designed and produced following the best European standards and in accordance with all the safety guidelines.

METAL PRESSURE GAUGE 400 B

Pressure gauge in high quality metal housing and highly resistant mineral glass.Metalic and mineral glass finish.Scale up to 400 bar

PRESSURE GAUGE W/HANDLE 400 B

High quality pressure gauge with metal body and side handle, specially designed for diving in sidemount. Finished in metal and mineral glass. Scale up to 400 bar.

220/2 320 BAR BOOSTER FULL SET

Booster Pump NRC 220/2 320 bar complete set for military diving and rebreather: The Booster 220/2 in a 320 bar final pressure SET. Booster set ready to connect, in a watertight case. Use: rebreather divers for loading small cylinders (2-3 liters), stage-bailout cylinders and loading mixtures in bibottles.

7 L ALUMINIUM CYLINDER WHITE WO/ VALVE 200 B

The range of aluminium cylinders offered by BtS Europa AG is produced by Luxfer Gas Cylinders either at their UK or US production plants. Luxfer Gas Cylinders is the world’s largest manufacturer of high pressure aluminium cylinders.

PY63 DIR PRESSURE GAUGE 350 B METAL

The TDS PY63 press gauge is specially designed for stage tanks; its main characteristic is that it has an expanded diameter of 63 mm (unlike standard gauges that have average 52 mm). The scale is enhanced by this larger diameter and also has the novelty that the mark of 100 bars is in the vertical, which helps in low visibility conditions and the backlit display, the needle is perfectly distinguishable.

300/2 320 BAR BOOSTER FULL SET

Booster Pump NRC 300/2 320 bar complete set for technical diving and rebreather: The Booster 300/2 in a 320 bar final pressure SET. Booster set ready to connect, in a watertight case. Use: Commercial divers & Diving Centers

PRESSURE GAUGE 400 B

Pressure gauge with metal body and up to 400 bar scale, ultra-resistant and durable due to to the protective rubber that covers it. Includes 80 cm length high-pressure hose.

STEEL 12 L 232 B LONG CONCAVE SINGLE

The range of steel cylinders offered by BtS Europa AG is produced by Eurocylinders System AG (ECS). ECS is one of the biggest and most efficient manufacturers of high pressure steel cylinders in Europe with an annual output of more than 500,000 cylinders. ECS manufactures on two production lines at their plant in Apolda, Germany. Cylinders are forged from 34CrMo4 steel.

20 L 232 B STEEL CYLINDER WITHOUT VALVE

The range of steel cylinders offered by BtS Europa AG is produced by Eurocylinders System AG (ECS). ECS is one of the biggest and most efficient manufacturers of high pressure steel cylinders in Europe with an annual output of more than 500,000 cylinders. ECS manufactures on two production lines at their plant in Apolda, Germany. Cylinders are forged from 34CrMo4 steel.

AIR/O2 SURFACE PRESSURE GAUGE DIN 200/300 B

Surface gauge for checking pressure out of the water bottles. DIN system. Purge by knob. Dial easy to read. Scale up to 400 bar. Is clean for use with oxygen, but if used with air the O2 service is lost.

TWIN TANK STEEL 10 L DIR

Full set of twin cylinders, DIR configured according to standards and includes the following items: 10 liters tanks in long format, working pressure 200 bar, thread M 25x2 tap EN144 and concave bottom, Twin cylinders valve with manilfold and isolation valve, Stainless steel rings 171 mm in diameter

BUNGEE PRO COMPASS GREY

New model tds diving compass pro liquid filled wrist in Bungee version (also available in rubber strap version). Redesigned quick response even in readings with up to 30 degrees.

TWIN TANK STEEL 12 L DIR

Full set of twin cylinders, DIR configured according to standards and includes the following items:12 liters tanks in long format, working pressure 232 bar, thread M 25x2 tap EN144 and concave bottom, Twin cylinders valve with manilfold and isolation valve, Stainless steel rings 171 mm in diameter

STAND ALONE TRIMIX ANALIZER

The Analyzer He/O2 is accurate and precision apparatus for measuring oxygen, nitrogen and helium concentration in diving breathing mixtures. It is a necessary assistant for technical divers who use nitrox and trimix mixtures.