METAL PRESSURE GAUGE 400 B

Pressure gauge in high quality metal housing and highly resistant mineral glass.Metalic and mineral glass finish.Scale up to 400 bar

PRESSURE GAUGE W/HANDLE 400 B

High quality pressure gauge with metal body and side handle, specially designed for diving in sidemount. Finished in metal and mineral glass. Scale up to 400 bar.

PY63 DIR PRESSURE GAUGE 350 B METAL

The TDS PY63 press gauge is specially designed for stage tanks; its main characteristic is that it has an expanded diameter of 63 mm (unlike standard gauges that have average 52 mm). The scale is enhanced by this larger diameter and also has the novelty that the mark of 100 bars is in the vertical, which helps in low visibility conditions and the backlit display, the needle is perfectly distinguishable.

PRESSURE GAUGE 400 B

Pressure gauge with metal body and up to 400 bar scale, ultra-resistant and durable due to to the protective rubber that covers it. Includes 80 cm length high-pressure hose.

AIR/O2 SURFACE PRESSURE GAUGE DIN 200/300 B

Surface gauge for checking pressure out of the water bottles. DIN system. Purge by knob. Dial easy to read. Scale up to 400 bar. Is clean for use with oxygen, but if used with air the O2 service is lost.

TWIN TANK STEEL 10 L DIR

Full set of twin cylinders, DIR configured according to standards and includes the following items: 10 liters tanks in long format, working pressure 200 bar, thread M 25x2 tap EN144 and concave bottom, Twin cylinders valve with manilfold and isolation valve, Stainless steel rings 171 mm in diameter

BUNGEE PRO COMPASS GREY

New model tds diving compass pro liquid filled wrist in Bungee version (also available in rubber strap version). Redesigned quick response even in readings with up to 30 degrees.

TWIN TANK STEEL 12 L DIR

Full set of twin cylinders, DIR configured according to standards and includes the following items:12 liters tanks in long format, working pressure 232 bar, thread M 25x2 tap EN144 and concave bottom, Twin cylinders valve with manilfold and isolation valve, Stainless steel rings 171 mm in diameter

M26 OXYGEN VALVE 232 B

Valve with M25x2 thread EN144 bottle, M26x2 output with a 232 atm working pressure. Elongated green plastic knob. Especially for stage cylinders. The valves are shipped with seals and lubricants compatible for oxygen.

M25X2 VALVE 232 B BLACK

M 25x2 cylinder therad and EN144-1. Standard Yoke Outlet with a Spin-Out Threaded DIN Adapter. Matte black finish, designed for special forces that avoids glare and camouflages the diver's silhouette.

TWIN RIGHT VALVE M25 232 BAR WITHOUT CAP

Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the right and output for connection to modular manifold.

M25 TWIN RIGHT VALVE WO/ CAP 232 B

Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the left and output for connection to modular manifold.

TWIN RIGHT VALVE BLACK M25 232 BAR WITHOUT CAP

Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the right and output for connection to modular manifold. Matte black finish, designed for special forces that avoids glare and camouflages the diver's silhouette.

TWIN LEFT VALVE BLACK M25 232 BAR WITHOUT CAP

Valve with M25 thread and toroidal sealing bottles (not EN144), exit DIN / INT convertible by core with a 232 atm working pressure. Black plastic knob on the left and output for connection to modular manifold. Matte black finish, designed for special forces that avoids glare and camouflages the diver's silhouette.

LEFT TWIN VALVE CAP

Modular side right-type valves cap, to close the side exit to exit manifold or modular plug.

RIGHT TWIN VALVE CAP BLACK

Modular side Right-type valves cap, to close the side exit to exit manifold or modular plug. Matt black finish of the military series.