OMAHA ZERO BOOT

Robust and equipped with a reinforced sole, the Omaha Zero TDS Boot is designed for use with drysuits provided with a sock-shaped foot and has a whole series of technical characteristics allowing it to perform its function perfectly.

HP GAUGE HOSE 15 Cm

High pressure hose for pressure gauge 15 cm length. Special to set the pressure gauge on the regulator of stage or bailout tank or in sidemount configurations.

PRESSURE GAUGE HP HOSE 18 CM

High pressure hose for pressure gauge 18 cm length. Special to set the pressure gauge on side stage or bailout tank regulator.

SUPER RAPTOR MONO GAS HYDRAULIC PLANT

SUPER Raptor is a hydraulic power generator with 18 HP twin cylinder gasoline engine. The machine is available on demand with flow rates ranging from 20 to 38 liters / min and pressures up to 210 bars, depending on the size of the pump installed (example: 30 liters at 175 bars or 38 liters at 140 bars ) .

DRYSUIT ROOCKBOOT

Stiff-soled boots made of 2.5 mm neoprene with double lining and polyester. For use with dry suits with socks. Insole and midsole with drainage water holes. Set by laces

HP GAUGE HOSE 65 CM

HP high pressure hose for pressure gauge 65 cm length. Connect the first stage regulator with a pressure gauge.

HP HOSE FOR GAUGE 70 CM

HP high pressure hose for pressure gauge 70 cm length. Connect the first stage regulator with a pressure gauge.

AMPHIBIAN BOOT 6.5 MM

The Amphibian diving boots are designed for a diver who wants the ultimate in support and protection. A stable footbed and hardwearing moulded outsole make this ideal for regular shore diving.

HP GAUGE HOSE 80 CM

HP high pressure hose for pressure gauge 80 cm length. Connect the first stage regulator with a pressure gauge.

HP GAUGE HOSE 110 CM

HP high pressure hose for pressure gauge 110 cm length. Connect the first stage regulator with a pressure gauge.

DUAL ELECTRIC RAPTOR HYDRAULIC PLANT

SUPER RAPTOR DUAL has a double hydraulic supply. It offers two circuits at 19 l / min each or a simple circuit at 38 l / min, both with a pressure of 140 bar.

HYDRAULIC PLANT NITRO GAS DUAL

SUPER RAPTOR is a hydraulic unit with gasoline engine and individual circuit, capable of providing different pressures and flow rates up to a maximum of 38 liters or a pressure of 175 Bar. It can also operate at: 30 l / min at 175 Bar or 38 l / min at 140 Bar.

HD13 HYDRAULIC HAMMER DRILL

13 kg hydraulic hammer drill for concrete, masonry and natural stone. Powerful and light, its use is ideal when performance, maneuverability and safety are required. The attack of the tops is the universal standard SDS MAX which allows to use a wide range tips and accessories available everywhere

LP REGULATOR HOSE 60 CM

LP Low pressure hose for regulator 60 cm length. Connecting the first stage to the second stage regulator.

DC18 DISC SAW DOA

The radial DC18 is the same tool as the DC14 and the DC16 but with a hydraulic motor to operate with a flow rate of 38L / min. The saw supports different sizes of discs: 300, 350, 400 and, to have several rotational speeds, it can work with a flow rate of 20, 30 or 40 L / min.

7SEVEN DPV

Suex 7Seven Scuba Diving DPV: From SUEX’s recreational line, 7Seven is the most accessible underwater scooter for beginner divers. This entry-level model can operate at depths of up to 80 metres, with a maximum speed of 60 m/min and an autonomy of up to 75 minutes at cruising speed. It is compatible with air transport, for a worldwide diving experience.

AS23 HYDRAULIC GRINDER DOA

AS23 is a compact angle sharpening saw which, thanks to its hydraulic operation, provides power, reduced noise, long life and maximum safety with the implicit impossibility of electric shock.