HP GAUGE HOSE 15 Cm
High pressure hose for pressure gauge 15 cm length. Special to set the pressure gauge on the regulator of stage or bailout tank or in sidemount configurations.
High pressure hose for pressure gauge 15 cm length. Special to set the pressure gauge on the regulator of stage or bailout tank or in sidemount configurations.
TDS Tek Advanced diving surface marker buoy SMB 150 cm legth in red color. The inflation is realized by plastic valve with a bc hose, wing hose or dry suit hose. Also allows the buccal inflation. Thanks to its closed system, the air remains in the interior preserving the shape of the buoy, keeping it erect and comletely inflated on surface. It´s also possible to use as a bouyancy emergency element on the surface.
The favorite knife of professionals, due to its robustness and size. Special for cutting big ends, pipes, etc.
High pressure hose for pressure gauge 18 cm length. Special to set the pressure gauge on side stage or bailout tank regulator.
HP high pressure hose for pressure gauge 65 cm length. Connect the first stage regulator with a pressure gauge.
The AP Diving surface marker buoys can be inflated from a secondary air source, at any time during the dive to signal the end of it and mark the starting point .Also can be used as decompression globe.
HP high pressure hose for pressure gauge 70 cm length. Connect the first stage regulator with a pressure gauge.
The best solution to blend Nitrox while emptying B50 safety. Allows to blend any Nitrox up to 40 % of O2. The technique consists in mixing the Nitrox before passing it through the compressor. It is for this reason that we can not exceed 40 % of O2.
Hard plastic case for the Green River knife. This allows for better transport and prevents accidental cuts.
HP high pressure hose for pressure gauge 80 cm length. Connect the first stage regulator with a pressure gauge.
The solution to mix Nitrox, Trimix, Triox and Héliox while emptying B50. Allows to mix any Nitrox, Trimix, Triox and Héliox having a maximal rate of 40% of O2. The technic consists in making Nitrox, Trimix, Triox or Héliox before compressing it by the mean of the compressor. That is why we must not exceed 40% of O2.
HP high pressure hose for pressure gauge 110 cm length. Connect the first stage regulator with a pressure gauge.
The TDS GR UEI knife is a diving knife built with the robustness necessary for the most demanding jobs and responding to all the circumstances in which it is necessary to use it. Extended in military use, it has a design similar to that used by professional divers, but with a blade length of 10cm which makes it more manageable and with the flat tip.This version includes the Kydex case.
LP Low pressure hose 20 cm length with pipe clip to attach to a low pressure inflator . Especially for sidemount.