HP GAUGE HOSE 15 Cm
High pressure hose for pressure gauge 15 cm length. Special to set the pressure gauge on the regulator of stage or bailout tank or in sidemount configurations.
High pressure hose for pressure gauge 15 cm length. Special to set the pressure gauge on the regulator of stage or bailout tank or in sidemount configurations.
tds iron wing 16 l: Donut wing type from tds iron model 16 l capacity and with 1000 denier nylon, double polyurethane bladder. Suitable for single tank diving.
High pressure hose for pressure gauge 18 cm length. Special to set the pressure gauge on side stage or bailout tank regulator.
Donut wing type 20 l capacity with 1000 deniers, double polyurethane bladder. Suitable for diving with double tanks.
HP high pressure hose for pressure gauge 65 cm length. Connect the first stage regulator with a pressure gauge.
Stainless steel spring for jet fin fins type . The adjusto to the fin is made by a stainless steel screw with security nut. Add strength, durability and safety to the fins
The TDS Jet Fin Xtreme fin is one of the shortest fins of its kind, with a lateral reinforcement and designed to make it more maneuverable, which makes it very popular, like its predecessor, among technical and professional divers. Made of 100% rubber and with a compact design for superior mobility, it incorporates a dynamic edge for more powerful thrust, this design reduces drag on the up kick and improves the thrust on the up kick the bottom.
HP high pressure hose for pressure gauge 70 cm length. Connect the first stage regulator with a pressure gauge.
Equipped with hard metal back (stainless steel or aluminum), they are designed for technical divers that enjoy the deep dives with big or double cylinders that need more thrust.
The TDS Jet Fin Xtreme fin is one of the shortest fins of its kind, with a lateral reinforcement and designed to make it more maneuverable, which makes it very popular, like its predecessor, among technical and professional divers. Made of 100% rubber and with a compact design for superior mobility, it incorporates a dynamic edge for more powerful thrust, this design reduces drag on the up kick and improves the thrust on the up kick the bottom.
HP high pressure hose for pressure gauge 80 cm length. Connect the first stage regulator with a pressure gauge.
Equipped with hard metal back (stainless steel or aluminum), they are designed for technical divers that enjoy the deep dives with big or double cylinders that need more thrust.
The TDS Jet Fin Xtreme fin is one of the shortest fins of its kind, with a lateral reinforcement and designed to make it more maneuverable, something that makes it very popular, like its predecessor, among technical and professional divers. Made of 100% rubber and with a compact design for superior mobility, it incorporates a dynamic edge for a more powerful thrust, this design reduces drag on the up kick and improves thrust on the down kick.
HP high pressure hose for pressure gauge 110 cm length. Connect the first stage regulator with a pressure gauge.
Equipped with hard metal back (stainless steel), they are designed for technical divers that enjoy the deep dives with big or double cylinders that need more thrust.
LP Low pressure hose 20 cm length with pipe clip to attach to a low pressure inflator . Especially for sidemount.
Equipped with hard metal back (stainless steel or aluminum), they are designed for technical divers that enjoy the deep dives with big or double cylinders that need more thrust.
Omaha Amphibian technical rockboot built in technical tissue with reinforced seams and loops. Must be used over the neoprene shoe applied to dry suits.
LP Low pressure hose with racord to attach to on low pressure inflator BPI, 55 cm length.
Equipped with hard metal back (stainless steel or aluminum), they are designed for technical divers that enjoy the deep dives with big or double cylinders that need more thrust.
LP Low pressure hose for regulator 60 cm length. Connecting the first stage to the second stage regulator.
tds dsi tech wing 20 liters: Double-bladder all-back stabilizing jacket, Outer bag of CORDURA® 1000, Inner air cell of tear-proof polyurethane, radio frequency welded easily replaceable, Corrugated group with inox elements, Volume: 20 liters, Lift: 180 N (18.35 kg), CE certified according to Norms EN250 and EN1809
TDS Jet Fin MSP belongs to the tactical-military range, tested by different armies and special forces. Jet Fin type rubber fin "long" with traditional design, also available to technical and sport divers, as well as professional divers, looking for a powerful and immediate response fin. Made of 100% rubber, it offers a very high durability over time as well as resistance in the worst conditions.